Section 4: Configuration
June 2017
Figure 4-6 AMS Device Manager - Service Tools All Variables status indicators
8.
9.
10.
88
Daniel 3812 Liquid Ultrasonic Flow Meter Installation Manual
d.
Click the
All Variables
Third and Fourth Variables.
Click
to return to the Overview page.
OK
Enable the Write Protect switch on the CPU Module to protect the meter's
configuration.
From the Overview window, click
values calculated from the Full scale volumetric flow rate used with frequency outputs
and the Maximum frequency for frequency output.
tab to view a graphical display of the Primary, Secondary,
Display Meter K-Factors
Using AMS Device Manager to configure the meter
3-9000-765 Rev H
. K-Factors are a read-only