REP 13 Removal of the LVPS, HVPS and Paper Feed Sensor
Parts List on
PL 11
1. Remove the Fuser Assembly,
2. Unplug the connectors (PJ7 and PJ13) from the Print Engine Board and remove the harness
from the cord holder.
3. Remove the HVPS/LVPS assembly (six screws).
4. Unplug the connectors (CN1 and CN3) from the LVPS and remove the harness from the cord
holder.
5. Remove the LVPS (four screws).
6. Remove the HVPS (one screw).
7. Remove the Fuser Fan (two screws).
FaxCentre F116/F116L
REP
12.
Fuser Fan
LVPS
(PU1)
Figure 1.
HVPS (HV1)
Figure 2.
9/04
Repairs/Adjustments
4127s052
4127s107
4-15