Xerox FaxCentre F116 Service Manual page 135

Downloading via Local Network
This procedure requires an Ethernet cable and a PC equipped with a LAN card and the Outlook
express software.
• Create an Outlook Express account:
- Launch Outlook Express.
- In the Tools menu, select Accounts. The window Internet Accounts appears.
- Click on the Add button and select Mail.
- Type "toto" in the Display Name field and click on Next.
- Type "toto@toto" in the Email Address field and click on Next.
- Type the address "169.254.0.1" in the Incoming Mail Server field and Outgoing
Mail Server field and click on Next.
- Type "toto" in the Account Name field and click on Next and Finish.
• Check the account connection:
- Select the newly create account in the Internet accounts list and click on the Proper-
ties.
- In the Connection tab, tick the Connect using my local area network (LAN)
"Local Network" checkbox and click on OK.
• Connect the PC and the machine to the Ethernet cable.
• Perform the downloading process following the steps bellow:
- Modify the terminal IP address following the steps bellow:
- Go to the menu: !, 2, 5, 3, 2 then OK.
- Type 169 254 000 001 then OK and STOP.
- Position the SOS Softswitch bit 8 at 1: !, *, #, OK, 1, OK, STOP.
- Switch to the download mode: !, *, T. The machine displays the WAITING @ LOAD
message.
- Create a message (using Outlook Express) on the PC addressed to "toto@toto" and
attach to it the file containing the software to download to the terminal. Send the
message.
The machine LCD screen displays the TELELOADING message.
At the end of download, the machine reboots.
- Check that the download was successful by typing the following sequence on the
machine keyboard: !, *, V.
The machine display shows the software version and the checksum.
FaxCentre F116/F116L 9/04
General Procedures/Information
6-31