Xerox FaxCentre F116 Service Manual page 67

• Remove the dual line daughter board if it is installed.
Assembly
• Unpack and visually inspect the new parts.
• Position the CPU board in the rack, screw in and tighten the four mounting screws.
• If applicable, install the dual line daughter board.
• Hold the rack ready to insert it into the rails and reconnect the CIS and control panel
flat cables.
• Insert the rack into the rails up to the slide lock, reconnect the CIS motor and the
printer cable. Completely push in the rack.
• Screw in and tighten the two mounting screws.
FaxCentre F116/F116L 9/04
Repairs/Adjustments
4-27