Xerox FaxCentre F116 Service Manual page 7

Do not work with wet hands.
• Do not unplug or plug in the power cord, or perform any kind of service or inspec-
tion with wet hands. Doing so could result in an electric shock.
Do not touch a high-temperature part.
• A part marked with the symbol shown on the left and other parts such as the expo-
sure lamp and fuser roll can be very hot while the machine is energized. Touching
them may result in a burn.
• Wait until these parts have cooled down before replacing them or any surrounding
parts.
Maintain a grounded connection at all times.
• Connect the power cord to an electrical outlet that is equipped with a grounding
terminal.
Do not modify the product.
• Modifying this product in a manner not authorized by the manufacturer may result
in a fire or electric shock. This product uses a laser. Laser beam leakage may
cause eye damage or blindness.
Restore all parts and harnesses to their original positions.
• To promote safety and prevent product damage, make sure the harnesses are
returned to their original positions and properly secured in their clamps and sad-
dles in order to avoid hot parts, high-voltage parts, sharp edges, or being crushed.
• To promote safety, make sure that all tubing and other insulating materials are
returned to their original positions. Make sure that floating components mounted
on the circuit boards are at their correct distance and position off the boards.
FaxCentre F116/F116L
WARNING
9/04
Introduction
v