Monitoring The Server System; Shutting Down The Server System - Intel MFSYS25 User Manual

3. Connect a video monitor and USB mouse and keyboard to the front of the compute
module using the USB hub.
4. Connect a USB CD-ROM/DVD-ROM drive to the compute module.
5. From the remote client machine, log into the management module and configure
storage and (optionally) networking for the compute module.
6. Power on the CD-ROM/DVDROM drive and insert the operating system install
media.
7. Power on the compute module and install the operating system.
Refer to

Monitoring the Server System

The management module reports complete system health. From a remote client, an IT
administrator can easily monitor the state of the server system. Refer to
Server Chassis" on page 41

Shutting Down the Server System

To remove power from the Intel
properly power down all compute modules. Next, disconnect all power cables from the
power source. Refer to the individual Intel® Compute Module User Guide for more
information on powering down the compute module(s).
40
"Configuring the Server Chassis" on page 41
for more details.
for configuration details.
®
Modular Server System MFSYS25, you must first
Intel® Modular Server System MFSYS25 User Guide
"Configuring the