Product Specifications - Infopia ELEMENT MULTI Instructions For Use Manual

Troubleshooting for Inconsistent or unexpected test
results
If you continue to get unexpected results, check your system with control
solution.
If you experience symptoms that are not consistent with your glucose and
cholesterol results, Please make sure you have followed all instructions in this
instructions for use. Then, contact infopia Customer Service. Never ignore
symptoms or make significant changes to the control program.
Product Specification
Devision
Sample type
Testing types
Testing method
Testing range
Element Multi
Cholresterol
Testing time
Test
Calibration
Sample volume
Operating humidity
Operating temperature
Storage temperature
Hct range
Content
Capillary whole blood, Venous blood,
Serum
Total cholesterol
HDL-cholesterol
Triglyceride
LDL-cholesterol Calculated
Enzymatic-colorimetric method
Total cholesterol : 100~400mg/dL,
Triglyceride :70~600mg/dL,
HDL-cholesterol : 25~80mg/dL
2 minutes
Plasma - Equivalent
5 ㎕
10 ~ 90 %
18~30ºC(64~86ºF)
2 ~ 30ºC(36 ~ 86ºF)
30 ~ 55%
• 50 •
Product Specification
Devision
Sample type
Testing Types
Test range
Sample volume
Testing time
Element Multi
glucose test
Calibration
Operating humidity
Operating temperature
Storage temperature
Hct range
Standard supported
Nominal Read/write range
RFID
Antenna
Frequency
Content
Capillary whole blood
Glucose
10~600 mg/dL
0.3 ㎕
3sec
Plasma - Equivalent
10 ~ 90 %
10~40ºC(50~104ºF)
2 ~ 30ºC(36 ~ 86ºF)
20 ~ 60%
ISO/IEC 15693
< 2cm
Integrated
13.56 MHz
• 51 •