Infopia ELEMENT MULTI Instructions For Use Manual page 17

Test Procedure
Please apply the sample to the HDL-cholestrol
test area of test strip until you hear beep sound.
Then, the symbol,
Please apply the sample to the triglyceride test
area of test strip until you hear beep sound.
Then, the symbol,
The meter displays
order, which means it is under test.
Total cholesterol is displayed with 3 times
of buzzing sound.
In the case of calculated LDL-cholesterol, if
density of triglyceride is over 350mg/dL, it can't
be measured.
In order to check each test item, please press up or down button. You can
check out each result of Total Cholesterol, HDL-Cholesterol and Triglyceride.
disappears.
disappears.
, blinking in
• 32 •
Test Procedure
2. Test for each single item
1) Total Cholesterol test
Insert a total cholesterol test strip and press
mode (
Place the RFID-tag on the strip vial to the area of
the RFID symbol (
Make sure code number matches the code on
the strip vial.
The meter displays the code number and the
testing symbols (
In 5 seconds the meter automatically enters into
testing mode.
The symbol of blood is blinking.
)button.
)on the meter.
) together.
• 33 •