Checking The System With Lipidprofile Check Strip; Instructions For Lancing Device - Infopia ELEMENT MULTI Instructions For Use Manual

Checking the system with LipidProfile check strip

Check your Element Multi meter with LipidProfile check-strip
When your meter has a problem.
Before first use.
When the test rusults of Element Multi are higher or lower than your symtoms.
Caution
LipidProfile check strip test is no substitute for control solution test.
Caution
To get the accurate result, the meter should be checked in room temperature(23~25
Keep the LipidProfile check-strip out of dirict sunlight for accurate test.
Insert LipidProfile check-strip and press
buttons at same time over 3 seconds. Check-
mode will be operated.
If your meter is working properly, "ooo" will be
displayed.
If your meter or check strip has a problem, "Err"
will be displayed. Please contact your local
representative, if "Err" persists.
• 24 •

INSTRUCTIONS FOR LANCING DEVICE

PRECAUTIONS
• Never use a lancet that has been used by someone else. This could lead to
contamination.
• If the lancing device is to be used by another person, the unit must be properly
disinfected and a new tip and lancet must be used.
• Do not leave the lancet in the device after use.
• A new lancet must only be placed into the lancing device directly before testing.
• This device has many small parts and could be a choking hazard for children if
swallowed.
• In the case of hospital use, hospitals need to consult their own infection control
and
protocols in order to avoid any contamination.
• Always dispose of the used lancet in a biohazard garbage container.
COMPONENTS
0 C).
Depth Indicator/Adjustable Tip
Clear Tip
Ejection System
Lancet Holder Release Button
• 25 •
Sliding Barrel