Deleting Your Results; Element Multi Software And Thermal Printer - Infopia ELEMENT MULTI Instructions For Use Manual

Deleting Your Results

Deleting individual test result
To delete any individual test result in the memory press
▲ or ▼ button for 3 or more seconds, while the test
result to delete is displayed. Then,
After the third beep sound, the test result is deleted. If
the print is set "ON", press ▼ button in 3 or more
seconds can be print memory results.
Deleting all test results
To delete all results press ▲ and ▼ button at the same
time for 3 or more seconds, while any test result is
displayed. Then,
After the third beep sound all test results are deleted.
Printing Your Results
Printing test results
Press ▼ button in 3 or more seconds can be print
memory results. (If the print is set "ON")
Caution
The deleted test results can't be recovered. Please be careful in deleting the test results.
is blinking.
is displayed and is blinking.
• 44 •

Element Multi Software and Thermal Printer

The Element Multi results can be transmitted to a personal computer.
Element Multi software and an interface cable are required for transmit-
ting results of Element Multi profile and glucose measurement system
to a personal computer. The software is available free of charge from
http://www.infopia21.com.
Interface(PC)cable and Thermal printer can be bought from your local
distributor.
The meter connects the interface cable to your PC or Printer.
'Con' on the LCD display
If Element Multi connected interface cable to your
PC(software is running). 'PC' on the LCD display
If Element Multi connected interface cable to your
Printer(Printer power On). 'Ptr' on the LCD display
• 45 •