GE c60 Instruction Manual page 145

Breaker protection system
Hide thumbs Also See for c60:
Table of Contents

Advertisement

CHAPTER 5: SETTINGS
Setting name
Description
Confirm RADIUS
Confirmation of the shared secret. The
Authentication
entry displays as asterisks.
(Shared) Secret
Table 5-4: General security settings
Setting name
Description
Session Lockout
Number of failed authentications before the
device blocks subsequent authentication
attempts for the lockout period
Session Lockout
The period in minutes that a user is prevented
Period
from logging in after being locked out
Syslog Server IP
The IP address of the target Syslog server to
Address
which all security events are transmitted
Syslog Server Port
The UDP port number of the target syslog
Number
server to which all security events are
transmitted
Device
When enabled, local Device authentication
Authentication
with roles is allowed. When disabled, the UR
only authenticates to the AAA server (RADIUS).
NOTE: Administrator and Supervisor (if still
enabled) remain active even after Device
authentication is disabled. The only permission
for local Administrator is to re-enable Device
authentication when Device authentication is
disabled. To re-enable Device authentication,
the Supervisor unlocks the device for setting
changes, and then the Administrator can re-
enable Device authentication.
Firmware Lock
Indicates if the device receives firmware
(via Lock Relay)
upgrades. If Enabled and the firmware
upgrade attempt is made, the device denies
the upgrade and displays an error message
that the lock is set. On each firmware upgrade,
this setting goes back to the default.
The Lock Relay setting blocks settings and
firmware updates.
Factory Service
When enabled, the device can go into factory
Mode
service mode. To enable, Supervisor
authentication is necessary.
Restore to Defaults Sets the device to factory defaults
Supervisor Role
When enabled, the Supervisor role is active. To
enable, Administrator authentication is
necessary. When disabled, the Supervisor role
is inactive. To disable, Supervisor
authentication is necessary.
RADIUS user names Ensures that RADIUS user names are not the
same as local/device role names
Password
Local/device roles except for Observer are
password-protected. All RADIUS users are
password-protected.
C60 BREAKER PROTECTION SYSTEM – INSTRUCTION MANUAL
Minimum
Maximum
See the
245 characters
Password
Requirements
section
Minimum
Maximum Default
0 (lockout
99
disabled)
0 (no period)
9999
0.0.0.0
223.255.
255.254
1
65535
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
No
Yes
Disabled
Enabled
See RADIUS
See
server
RADIUS
documents
server
document
s
See the
See the
Password
following
Requirements
password
section earlier
section for
in this chapter
requireme
nts
PRODUCT SETUP
Default
Units
Minimum
permission
N/A
-
Administrator
Units
Minimum
permission
3
-
Administrator
3
min
Administrator
0.0.0.0
-
Administrator
514
-
Administrator
Enabled
-
Administrator
Enabled
-
Administrator
Disabled
-
Supervisor
(Administrator
when Supervisor
is disabled)
No
-
Administrator
Enabled
-
Administrator to
enable and
Supervisor to
disable
-
Administrator
Change
Text
The specified
Me1#
role and
Administrator,
except for
Supervisor,
where it is only
itself
5
5-19

Advertisement

Table of Contents
loading

Table of Contents