Creating A Wireless Network Connection - Intermec 700 Series Color User Manual

Chapter 2 — Windows Mobile 2003
106
Note: The following information applies when you have "Wireless
802.11" selected via the NDISTRAY pop-up menu (see page 129).

Creating a Wireless Network Connection

Microsoft Corporation's wireless network configuration tool is called
"Wireless Zero Config." Intermec Technologies recommends that you use
the Wireless Network control panel applet instead as it offers more security
choices and exhibit better roaming behavior. Information about the Wire-
less Network control panel applet is in Appendix A.
Networks already configured are preferred networks and are listed in
Wireless networks. You can connect to only preferred networks or search
for and connect to any available network.
A wireless network can be added either when the network is detected, or
manually by entering settings information. To determine if authentication
information is needed, see your network administrator.
1 Tap Start > Settings > the Connections tab > the Connections icon.
700 Series Color Mobile Computer User's Manual