Disable The Beeper - Intermec 700 Series Color User Manual

Chapter 1 — Introduction

Disable the Beeper

10
For Units With PSM Build 3.00 or Newer
To select a beeper volume for the 700 Color Computer, tap Start > Set-
tings > the System tab > the Intermec Settings icon. Tap the Device Set-
tings option, tap (+) to expand Beeper, then tap (+) to expand Volume.
Select an item, then close this option.
700 Color Screen
Note: Information about the settings you can configure with the Intermec
Settings control panel applet is described in the Intermec Computer Com-
mand Reference Manual (P/N: 073529). The online manual is available
from the Intermec web site at www.intermec.com.
Do the following to disable the beeper:
1 Tap Start > Settings > the Personal tab > Sounds & Notification > the
Volume tab.
2 Drag the System volume slider completely to the left to "Silent."
3 Tap ok to exit this applet.
730 Screen
700 Series Color Mobile Computer User's Manual