Intermec 700 Series Color User Manual page 132

Chapter 2 — Windows Mobile 2003
110
5 Tap the 802.1x tab, select either "PEAP" or "Smart Card or Certificate"
for the EAP type, then tap Properties to adjust its settings.
6 Tap ok to return to the Configure Wireless Network screen.
7 From the Networks to access drop-down list, select "All Available,"
"Only access points," or "Only computer-to-computer" depending on
the type of networks to which you connect.
To connect only to networks you have already configured, clear Auto-
matically connect to non-preferred networks.
Tap ok to close this screen.
Note: If you select to automatically connect to non-preferred networks,
your device detects any new networks and provide you the opportunity to
configure them.
700 Series Color Mobile Computer User's Manual