Core (760, 761 Computers With Wan Radios) - Intermec 700 Series Color User Manual

Chapter 4 — Network Support

CORE (760, 761 Computers with WAN Radios)

Activating CORE
Install an Available Radio Module
132
The Intermec CORE application provides a framework for various mod-
ules that let you configure and manage your Intermec products. If a mod-
ule is not yet used or set, CORE defaults to the first module as listed al-
phabetically.
These modules are software plug-ins that can be configuration tools, such
as the 802.11b or 802.11b/g radio configuration module, or they can pro-
vide information on your environment, such as a battery life module.
CORE modules are collections of specific information. Each module can
display general and detailed information. Tap the General and Details tabs
near the bottom to switch between general and detailed information. Note
that not all modules have detailed information.
CORE is built into the operating system of every 760 or 761 Computer.
To run CORE for the first time, select Start > Programs > File Explorer,
select "\Flash File Store\Apps\CORE," then tap the CORE executable file.
After CORE is run on the 760 or 761 Computer, tap Start > Programs >
Core to access this application henceforth.
Note: To deactivate CORE, tap CORE > Exit from within the CORE
application.
To install an available radio module onto your 760 or 761 Computer, tap
Modules > Add/Remove, select a module from the bottom Available box,
then tap Add to put the selected module in the upper Installed box. Click
OK to exit the Add/Remove Modules screen.
700 Series Color Mobile Computer User's Manual