Intermec 700 Series Color User Manual page 131

700 Series Color Mobile Computer User's Manual
Note: The following information applies when you have Enable
Microsoft's Wireless Zero Config checked via the Wireless Network
control panel applet (see Appendix A, "Configurable Settings").
To Enable WPA Authentication (730, 751, 751, 761 Computers)
a Set Authentication to "WPA." See page 364 for information about
WPA encryption.
b Set Data Encryption to either "WEP" or "TKIP." See page 364 for
information about WEP and TKIP encryption.
To Enable WPA Authentication Using a Preshared Key (730, 741, 751, 761 Computers)
a Set Authentication to "WPA-PSK." See page 364 for information
about WPA encryption.
b Set Data Encryption to either "WEP" or "TKIP." See page 364 for
information about WEP and TKIP encryption.
c Enter the new Network key.
Chapter 2 — Windows Mobile 2003
109