Chapter
4
—
Network Support
Ethernet Communications (740, 741, 750, 751, 760, 761 Computers)
128
Follow the steps below to start Ethernet communications on the 700 Color
Computer. If your system does not contain an 802.11b or 802.11b/g
radio, then Ethernet networking using DHCP is selected as the default.
When "Built-in Ethernet" is selected from the NDISTRAY pop-up menu
(the Network Driver Interface Specification tray application),
then the Ethernet icon shown to the left appears in the System Tray as
circled in the following illustration.
700 Series Color Mobile Computer User's Manual