Connecting To Work; Creating A Modem Connection To A Network - Intermec 70 User Manual

Model 70 Pocket PC 2002 User's Guide

Connecting to Work

If you have access to a network at work, you can send e-mail messages, view intranet
pages, synchronize your Model 70, and possibly access the Internet. You can connect to
work in one of two ways:
•
•

Creating a Modem Connection to a Network

1. Obtain the following information from your network administrator: dial-up access
2. Install a modem card, or use a NULL modem cable and appropriate adapters to
3. Tap
4. In the Modem tab, tap New.
5. Enter a name for the connection, such as "Company Connection."
6. In the Select a modem list, select your modem type. If your modem type does not
7. You should not need to change any settings in Advanced. Most servers now use a
8. Enter the access phone number, and tap Next.
9. Select other desired options, and tap Finish.
10. In the Dialing Locations tab, specify your current location and phone type (most
6-6
Create a modem connection by using a RAS account. Before you can create this
modem connection, your network administrator will need to set up a RAS account
for you. If this is the method you want to use, see "Creating a Modem Connection
to a Network" in the next section. Your network administrator may also give you
VPN settings.
Use an Ethernet card and a net tap to connect to the network. If this is the method
you want to use, see "Creating an Ethernet Connection to a Network" later in this
section.
telephone number, user name, password, domain name, and TCP/IP settings.
connect an external modem to your Model 70 through the serial port.
and then Settings. In the Connections tab, tap Connections. Under The
Internet settings, select Internet Settings and tap Modify.
appear, try reinserting the modem card. If you are using an external modem that is
connected to your Model 70 with a cable, select Hayes Compatible on COM1.
dynamically-assigned address. If the server you are connecting to does not use a
dynamically-assigned address, tap Advanced and then the TCP/IP tab and enter the
address. When finished, tap ok and then Next.
phone lines are tone). These settings will apply to all connections you create.