Intermec 700 Series Color User Manual
  1. Manuals
  2. Brands
  3. Intermec Manuals
  4. Handhelds
  5. 700 Series Color
  6. User manual

Intermec 700 Series Color User Manual

Hide thumbs Also See for 700 Series Color:
Table of Contents

Advertisement

Quick Links

Download this manual
User's Manual
700 Series Color
Mobile Computer

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 700 Series Color and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Intermec 700 Series Color

Summary of Contents for Intermec 700 Series Color

  • Page 1 User's Manual 700 Series Color Mobile Computer...
  • Page 2 The information contained herein is proprietary and is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec.
  • Page 3 04/2004 Updated 802.11 security supplicant information. Added new network selection APIs. Incorporated information about the Intermec Settings control panel applet for PSM Builds 3.00 or newer. Added information about the PhoneUtility application. Revised Chapter 4, “Network Support.” Added tethered scanner and internal scanner configura- tion and troubleshooting information to Chapter 6, “Scanner Support.”...
  • Page 4 700 Series Color Mobile Computer User’s Manual...

  • Page 5: Table Of Contents

    ............700 Series Color Mobile Computer User’s Manual...
  • Page 6 ............700 Series Color Mobile Computer User’s Manual...
  • Page 7 ........700 Series Color Mobile Computer User’s Manual...
  • Page 8 ........viii 700 Series Color Mobile Computer User’s Manual...
  • Page 9 ..........700 Series Color Mobile Computer User’s Manual...
  • Page 10 ....... Copying CDMA Radio Module CAB Files from Intermec Web Site .
  • Page 11 ........700 Series Color Mobile Computer User’s Manual...
  • Page 12 ..........700 Series Color Mobile Computer User’s Manual...
  • Page 13 ..........700 Series Color Mobile Computer User’s Manual...
  • Page 14 ........... . 700 Series Color Mobile Computer User’s Manual...
  • Page 15 ............700 Series Color Mobile Computer User’s Manual...
  • Page 16 ..........700 Series Color Mobile Computer User’s Manual...
  • Page 17 ..............700 Series Color Mobile Computer User’s Manual...
  • Page 18 Contents xviii 700 Series Color Mobile Computer User’s Manual...

  • Page 19: Before You Begin

    Safety Summary Your safety is extremely important. Read and follow all warnings and cautions in this document before handling and operating Intermec equipment. You can be seriously injured, and equipment and data can be damaged if you do not follow the safety warnings and cautions.

  • Page 20: Safety Icons

    être strictement respecté pour empêcher l’endommagement ou la destruction de l’équipement, ou l’altération ou la perte de données. Note: Notes either provide extra information about a topic or contain special instructions for handling a particular condition or set of circumstances. 700 Series Color Mobile Computer User’s Manual...

  • Page 21: Global Services And Support

    Global Services and Support Warranty Information To understand the warranty for your Intermec product, visit the Intermec web site at www.intermec.com and click Service & Support. The Intermec Global Sales & Service page appears. From the Service & Support menu, move your pointer over Support, and then click Warranty.

  • Page 22: Who Should Read This Manual

    Series Color Mobile Computer and how to configure, troubleshoot, and support it. You must be familiar with your host PC, your network, and your other Intermec equipment. Related Documents This table contains a list of related Intermec documents and their part numbers. Document Title Part Number...

  • Page 23: Introduction

    Introduction This chapter introduces the 700 Series Color Mobile Computer, devel- oped by Intermec Technologies Corporation to enhance wireless connec- tivity needs. This chapter contains hardware and software configuration information to assist you in making the most out of your 700 Color Computer.

  • Page 24: Ambient Light Sensor

    To adjust the ambient light sensor, tap Start > Settings > the System tab > the Backlight icon > the Both Power tab. Make your selections, then tap ok to exit this applet. 700 Series Color Mobile Computer User’s Manual...

  • Page 25: Audio System

    1–8 KHz. Speaker Speaker 700 Color Computer 730 Computer Warning: Do not place the speaker next to your ear when the speaker volume is set to “Loud” (maximum), or you may damage your hearing. 700 Series Color Mobile Computer User’s Manual...

  • Page 26: Microphone

    Hirose docking connector. Charging/Docking Headset jack connector This is the bottom of the 700 Color Computer. Note that the keypad is to the bottom in this illustration. 700 Series Color Mobile Computer User’s Manual...

  • Page 27: Battery

    You can also view the battery status by accessing the Unit Information control panel applet. Tap Start > Settings > the System tab > the Unit Information icon > the Battery Status tab to view the current status. Tap ok to exit this information. 700 Series Color Mobile Computer User’s Manual...
  • Page 28 Computer, tap Start > Settings > the System tab > the Power icon > the Battery tab. Drag the slider bar to the right to change the suspend voltage to favor suspend time over rundown time, then click ok to exit. 700 Series Color Mobile Computer User’s Manual...

  • Page 29: Beeper

    1 Tap Start > Settings > the Personal tab > Sounds & Notifications > the Volume tab. 2 Drag the System volume slider bar to the right of the “Silent” position. 3 Tap ok to exit this applet. 700 Series Color Mobile Computer User’s Manual...

  • Page 30: Disable The Scanner Mute

    3 Drag its slider bar (note the greyed slider bar) to the appropriate level of loudest, with the left side being the most loud and the right side being the most quiet. Tap ok to exit this applet. 700 Series Color Mobile Computer User’s Manual...

  • Page 31: Select A Beeper Volume

    Vibrate option is not supported. 4 Tap ok to confirm this change, then tap ok to exit the Data Collection control panel applet. 700 Color with Laser Scanner 700 Color with Imager Screen 730 Screen Screen 700 Series Color Mobile Computer User’s Manual...

  • Page 32: Disable The Beeper

    To select a beeper volume for the 700 Color Computer, tap Start > Set- tings > the System tab > the Intermec Settings icon. Tap the Device Set- tings option, tap (+) to expand Beeper, then tap (+) to expand Volume.

  • Page 33: Keypad

    Start > Settings > the System tab > Backlight. Use the left/right scroll arrows to move to and tap the Keyboard tab. Make your selection, then tap ok to exit this applet. 700 Series Color Mobile Computer User’s Manual...

  • Page 34: Key Sequences

    [Gold] Decrease volume [Gold] Note: Pocket PC applications are accessible only if configured to do so in the App Launch portion of the Utilities control panel applet. See page 358 for more information. 700 Series Color Mobile Computer User’s Manual...
  • Page 35 [Gold/White] Decrease volume [Gold/White] Note: Pocket PC applications are accessible only if configured to do so in the App Launch portion of the Utilities control panel applet. See page 358 for more information. 700 Series Color Mobile Computer User’s Manual...

  • Page 36: Alpha (Blue) Plane Keys

    F 1 8 8 8 F 1 9 F 9 9 F 1 9 9 F 9 9 9 F 1 9 9 9 F 9 9 9 9 F 1 9 9 9 9 700 Series Color Mobile Computer User’s Manual...
  • Page 37 P d g Q d g R d g S d g T d g U d g V d g W d g X d g Y d g Z 700 Series Color Mobile Computer User’s Manual...

  • Page 38: Modem Support

    S Snap-on modem, a stand-alone product, that attaches to the bottom of your 700 Color Computer. Note that you cannot place this modem in a dock, printer, or other devices. Contact your Intermec representative for more information. PSM Build Version The Persistent Storage Manager (PSM) is an area of storage which is em- bedded in a section of the system’s FLASH memory.

  • Page 39: Resetting Your 700 Color Computer

    4 Reinstall the battery pack. Reset button Reset button 700 Color Computer 730 Computer This illustration shows the back of the 700 Color Computer on the left and of the 730 Computer on the right. 700 Series Color Mobile Computer User’s Manual...

  • Page 40: Software Build Version

    Software Build Version To check to see if your 700 Color Computer has the latest software build, select Start > Internet Explorer > the Intermec logo. The latest software build version is displayed beneath the Version Information title. This information would be useful should you need assistance.

  • Page 41: Storage Media

    700 Color Computer 730 Computer This illustration shows the top of the 700 Color Computer on the left and of the 730 Computer on the right. Note that the keypad is to the bottom. 700 Series Color Mobile Computer User’s Manual...

  • Page 42: Vibrator

    2 Use the right and left arrows to scroll to the Beeper/LED tab, then tap this tab. 3 Tap Beeper, select the “Vibrate” option, then tap Apply. 4 Tap ok to confirm this change, then tap ok to exit the Data Collection control panel applet. 700 Series Color Mobile Computer User’s Manual...

  • Page 43: Wireless Network Support

    Do the following to enable the vibrator for the 700 Color Computer. Tap Start > Settings > the System tab > the Intermec Settings icon. Tap the Device Settings option, tap (+) to expand Beeper, then tap (+) to expand Vibrate.

  • Page 44: Accessories

    Introduction Accessories The following accessories are available for the 700 Color Computer. Note that this is not a complete list. Contact your Intermec representative for in- formation about these and other accessories that are not in this list. Intermec Accessory Descriptions...

  • Page 45: Windows Mobile 2003

    Microsoft Pocket Outlook (page 46) Pocket Word (page 78) Pocket Excel (page 82) MSN Messenger (page 84) Windows Media Player for Pocket PC (page 89) Microsoft Reader (page 90) Pocket Internet Explorer (page 94) 700 Series Color Mobile Computer User’s Manual...

  • Page 46: Software Builds

    — Windows Mobile 2003 Software Builds Do the following to determine which Intermec build of Windows Mobile 2003 is on your unit. 1 Select Start > Internet Explorer > the Intermec logo. 2 Note the “Software Build” information displayed beneath the Version Information title.

  • Page 47: Where To Find Information

    Windows Mobile and many of the technologies supported by the 700 Col- or Computer are not from Intermec Technologies. Many of the utilities and features on a Windows Mobile device come directly from Microsoft without any modification from Intermec Technologies. There may be cer-...

  • Page 48: Basic Skills

    Status icons display information such as low batteries or when the 700 Color Computer is connected to a desktop or to the Internet. You can tap an icon to open the associated setting or program. 700 Series Color Mobile Computer User’s Manual...

  • Page 49: Programs

    Internet. Create handwritten or typed notes, drawings, and recordings. Keep track of your tasks. Play digital audio and video files that are stored on your 700 Series Com- puter or on a network. 700 Series Color Mobile Computer User’s Manual...

  • Page 50: Navigation Bar And Command Bar

    Drag the stylus off the button so that the command is not carried out. Tap to display the input panel. Tap to select button commands. Tap to select menu commands. 700 Series Color Mobile Computer User’s Manual...

  • Page 51: Pop-Up Menus

    S A message box appears on the screen. S A sound, which you can specify, is played. S A light flashes on your 700 Color Computer. S The 700 Color Computer vibrates. You can choose the notification types. 700 Series Color Mobile Computer User’s Manual...

  • Page 52: Entering Information

    To show or hide the input panel, tap the Input Panel button. Tap the ar- row next to the Input Panel button to see your choices. Select an input method. Tap to see your choices. Input Panel button. 700 Series Color Mobile Computer User’s Manual...

  • Page 53: Typing With The Onscreen Keyboard

    S To backspace one character, drag the stylus to the left across at least two keys. S To insert a carriage return, tap and hold the stylus anywhere on the keyboard and drag down. 700 Series Color Mobile Computer User’s Manual...

  • Page 54: Using Block Recognizer

    When you write a letter, it is converted to typed text that appears on the screen. For specific instructions on using Block Recognizer, with Block Recogniz- er open, tap the question mark next to the writing area. Tap for assistance. 700 Series Color Mobile Computer User’s Manual...

  • Page 55: Using Letter Recognizer

    You can cut, copy, and paste text by tapping and holding the selected words and then tapping an editing command on the pop-up menu, or by tapping the command on the Edit menu. 700 Series Color Mobile Computer User’s Manual...

  • Page 56: Writing On The Screen

    You can cut, copy, and paste written text in the same way you work with typed text: tap and hold the selected words and then tap an editing com- mand on the pop-up menu, or tap the command on the Edit menu. 700 Series Color Mobile Computer User’s Manual...

  • Page 57: Converting Writing To Text

    Tap to return to your original writing. Or, tap the word you want to use. 700 Series Color Mobile Computer User’s Manual...
  • Page 58 S If you add writing to a word to change it (such as changing a “3” to an “8”) after you attempt to recognize the word, the writing you add is not included if you attempt to recognize the writing again. 700 Series Color Mobile Computer User’s Manual...

  • Page 59: Drawing On The Screen

    Edit menu. To resize a drawing, make sure the Pen button is not selected, and drag a selection handle. 700 Series Color Mobile Computer User’s Manual...

  • Page 60: Recording A Message

    To play a recording, tap it in the list or tap its icon in the note. Indicates an em- bedded recording. Tap to show or hide the Recording toolbar. Tap to begin recording. 700 Series Color Mobile Computer User’s Manual...

  • Page 61: Using My Text

    S To edit a My Text message, tap Tools > Edit My Text Messages. Tap the message you want to edit and enter new text at the bottom of the screen. Tap to select a prewritten message. 700 Series Color Mobile Computer User’s Manual...

  • Page 62: Finding And Organizing Information

    Note: You can move files in File Explorer by tapping and holding the item you want to move, and then tapping Cut or Copy and Paste on the pop- up menu. 700 Series Color Mobile Computer User’s Manual...

  • Page 63: Customizing Your 700 Color Computer

    You can install any program created for your 700 Color Computer, as long as your 700 Color Computer has enough memory. The most popular place to find software for your 700 Color Computer is on the Windows Mobile Web site (http://www.microsoft.com/windowsmobile/resources/ communities/default.mspx). 700 Series Color Mobile Computer User’s Manual...
  • Page 64 3 Read program installation instructions, Read Me files, or other docu- mentation. Many programs provide installation instructions. 4 Tap the file, such as a *.XIP or *.EXE file to start the installation wi- zard. Follow the directions on the screen. 700 Series Color Mobile Computer User’s Manual...
  • Page 65 If the program does not appear in the list of installed programs, use File Explorer on your 700 Color Computer to locate the program, tap and hold the program, and then tap Delete on the pop-up menu. 700 Series Color Mobile Computer User’s Manual...

  • Page 66: Microsoft Activesync

    Microsoft Outlook on your desktop was copied to your 700 Color Com- puter, and you did not have to type a word. Disconnect the 700 Color Computer from your computer and you are ready to go! 700 Series Color Mobile Computer User’s Manual...
  • Page 67 Tap to stop synchronization. View synchronization status. Tap to synchronize via IR or change synchronization settings. For more information about ActiveSync on your 700 Color Computer, switch to ActiveSync, then tap Start > Help. 700 Series Color Mobile Computer User’s Manual...

  • Page 68: Calendar: Scheduling Appointments And Meetings

    If you use Outlook on your desktop, you can synchronize appointments between your device and desktop. Tap to go to Today Tap to display or edit the appointment details. Tap to create a new appointment 700 Series Color Mobile Computer User’s Manual...

  • Page 69: Synchronizing Calendar

    Calendar and only display appointments for that project. Note: In Month View, the day of an appointment assigned to the Holiday category appears in red. This day was assigned the Holiday category. Tap to access the Month view 700 Series Color Mobile Computer User’s Manual...

  • Page 70: What's An All Day Event

    “Normal,” then adjust the date and time appropriately. This describes the all day event. Tap to access the Day view 700 Series Color Mobile Computer User’s Manual...

  • Page 71: What's A Recurrence Pattern

    To see a list of available actions for an appointment, tap and hold the appointment. This displays the ap- pointment in bold. Tap to access the Agenda view Note: Tap Start > Today to quickly see your appointments for the day. 700 Series Color Mobile Computer User’s Manual...
  • Page 72 This displays an all day event not marked Free. This displays a morn- ing appointment. This displays appoint- ments in both morning and afternoon. This displays an after- noon appointment. Tap to access the Month view 700 Series Color Mobile Computer User’s Manual...

  • Page 73: Creating Or Changing An Appointment

    Tap to choose from predefined text. Tap to choose from previously entered locations. Tap to select a time. Tap to select a date. Notes is a good place for maps and directions. 700 Series Color Mobile Computer User’s Manual...

  • Page 74: Creating An All Day Event

    Calendar. For more information on copying files, see Active- Sync Help. To use the device to schedule an appointment with attendees lasting all day, set type to Normal, then adjust date and time accordingly. 700 Series Color Mobile Computer User’s Manual...

  • Page 75: Setting A Reminder For An Appointment

    Tap this to set reminders for new appointments automatically. To choose how you are reminded, for example by a sound, Tap Start > Settings > the Personal tab > the Sounds & Notifications icon. 700 Series Color Mobile Computer User’s Manual...

  • Page 76: Adding A Note To An Appointment

    Tap to activate the keyboard. Tap to activate the writing pad. Tap to activate the recorder. Note: To edit an existing note, tap the appointment in the calendar, tap Edit, then tap the Notes tab. 700 Series Color Mobile Computer User’s Manual...

  • Page 77: Making An Appointment Recurring

    <Edit pattern...>, and follow the steps in the wizard. Select your recurrence pattern from this drop- down list. Select <Edit pattern...> to access the wizard with which to custom- ize your recurrence. 700 Series Color Mobile Computer User’s Manual...

  • Page 78: Assigning An Appointment To A Category

    Note: To find an appointment assigned to a category, tap Tools > Catego- ries and select the type of appointment that you want displayed. To show all appointments again, tap Tools > Categories and clear all categories. 700 Series Color Mobile Computer User’s Manual...

  • Page 79: Sending A Meeting Request

    ISP or the network, rather than through synchronization with your desk- top, tap Tools > Options. From the Send meeting requests via drop-down list, tap the service to use to send the meeting request. 700 Series Color Mobile Computer User’s Manual...

  • Page 80: Finding An Appointment

    Deleting an Appointment 1 In the calendar, tap and hold the appointment. 2 On the pop-up menu, tap Delete Appointment. The next time you synchronize, the appointment is also deleted from the desktop. 700 Series Color Mobile Computer User’s Manual...

  • Page 81: Changing Calendar Options

    You may see less appointment information. Tap this to view larger text. Tap to indicate private. Tap to indicate attendees. Tap to indicate locations. Tap to indicate notes. Tap to indicate recurrences. Tap to indicate reminders. 700 Series Color Mobile Computer User’s Manual...

  • Page 82: Contacts: Tracking Friends And Colleagues

    Tap to display or edit the contact details. Tap and hold to display a pop-up menu of actions. Tap to toggle to By Company (note the Name view) Tap to create a new contact. 700 Series Color Mobile Computer User’s Manual...

  • Page 83: Creating A Contact

    Handwritten notes and drawings are saved as pictures when syn- chronizing with your desktop, but are removed when synchronizing with a server. For more information on synchronization, see ActiveSync Help on the desktop. 700 Series Color Mobile Computer User’s Manual...

  • Page 84: Viewing Contacts

    Note: You can change the appearance of the contact list by tapping Tools > Options. Tap for a list of phone num- bers and e-mail addresses. Indicates the default number. Tap to toggle By Name and By Company views. 700 Series Color Mobile Computer User’s Manual...

  • Page 85: Creating Or Changing A Contact

    Name arrow and enter the names in the proper box. Tap to access the Name fields. Tap anywhere outside the box to close and return to details. Note: New contacts are added to the displayed category. 700 Series Color Mobile Computer User’s Manual...

  • Page 86: Adding A Note To A Contact

    Tap to activate the keyboard. Tap to activate the writing pad. Tap to activate the recorder. Note: To edit an existing note, tap the contact, tap Edit, then tap the Notes tab. 700 Series Color Mobile Computer User’s Manual...

  • Page 87: Assigning A Contact To A Category

    A check mark indicates a selected category. Copying a Contact 1 In the contact list, select the contact. To select multiple contacts, tap and drag. 2 Tap Tools, and then select Copy Contacts. 700 Series Color Mobile Computer User’s Manual...

  • Page 88: Sending A Message To A Contact

    Note: To send an e-mail message, you must have an e-mail address config- ured for the contact. To send an SMS (Short Messaging Service) message, you must have an SMS number for the contact, which is usually the mo- bile phone number. 700 Series Color Mobile Computer User’s Manual...

  • Page 89: Finding A Contact

    1 In the contact list, tap and hold the contact. To select multiple contacts, tap and drag. Then, tap and hold the selected contacts. 2 On the pop-up menu, tap Delete Contact. The next time you synchro- nize, the contact is deleted from the desktop also. 700 Series Color Mobile Computer User’s Manual...

  • Page 90: Adding A Contact To Speed Dial

    S To increase the available space for displaying contacts in the list, clear Show ABC tabs. Clear this to view more contacts per screen. Tap this to view larger text. Enter the three-digit area code. Select from a drop-down list. 700 Series Color Mobile Computer User’s Manual...

  • Page 91: Tasks: Keeping A To Do List

    Tap and hold to display a pop-up menu of actions. Tap to create a new task. Note: To change the way information is displayed in the list, tap Tools > Options. 700 Series Color Mobile Computer User’s Manual...

  • Page 92: Creating A Task

    New items entered on one computer are copied to the other during syn- chronization. Handwritten notes and drawings are saved as metafiles (pic- tures). For more information on synchronization, see ActiveSync Help on the desktop. 700 Series Color Mobile Computer User’s Manual...

  • Page 93: Notes: Capturing Thoughts And Ideas

    Using the input panel, enter typed text into the 700 Color Computer. Do this by tapping keys on the onscreen keyboard or by using hand- writing recognition software. S Recording Create a stand-alone recording or embed a recording into a note. 700 Series Color Mobile Computer User’s Manual...

  • Page 94: Synchronizing Notes

    Outlook on your desktop and no longer store in the My Docu- ments folder for the 700 Color Computer. 700 Series Color Mobile Computer User’s Manual...

  • Page 95: Inbox: Sending And Receiving E-Mail Messages

    ActiveSync. For information on initiating Inbox synchronization or changing synchro- nization settings, see ActiveSync Help on your desktop or select Start > Help > Connections to see Connections Help. 700 Series Color Mobile Computer User’s Manual...

  • Page 96: Managing E-Mail Messages And Folders

    This synchronization of folders occurs whenever you con- nect to your mail server, create new folders, or rename or delete folders when connected. For all accounts except ActiveSync, you can access folder options by tap- ping Tools > Manage Folders. 700 Series Color Mobile Computer User’s Manual...

  • Page 97: Connecting To A Mail Server

    Note: You can set up several e-mail accounts including your ActiveSync account, but you can set up only one SMS account. Note: You cannot add a new account while connected. Tap Accounts > Disconnect to disconnect. Note: You cannot delete your SMS account. 700 Series Color Mobile Computer User’s Manual...
  • Page 98 Note: The size column in the message list displays the local size and server size of a message. Even when a message has downloaded fully, these num- bers may differ because the size of a message can vary between the server and the device. 700 Series Color Mobile Computer User’s Manual...

  • Page 99: Composing And Sending Messages

    You can directly call the sender of an SMS message by tapping the icon shown to the left, then Call. Note: Depending on the e-mail address options that you select, you can use a directory service in addition to your contact list to verify names. 700 Series Color Mobile Computer User’s Manual...

  • Page 100: Companion Programs

    Tap to change the sort order of the list. Tap to open a document. Tap and hold an item to see a pop-up menu of actions. Tap to create a new document. 700 Series Color Mobile Computer User’s Manual...

  • Page 101: Typing Mode

    Tap and hold to see a pop-up menu of actions. Tap to return to the document list (changes are saved automatically). Tap to change formatting options. Tap to format text. Tap to show or hide the toolbar. 700 Series Color Mobile Computer User’s Manual...

  • Page 102: Writing Mode

    .WAV files. For more information on recording, see “Basic Skills” on page 26. For more information on using Pocket Word, tap Start > Help > Pocket Word to see Pocket Word Help. 700 Series Color Mobile Computer User’s Manual...

  • Page 103: Drawing Mode

    Help on the desktop. Note: When you delete a file on either your desktop or your 700 Color Computer, the file is deleted in the other location the next time you syn- chronize. 700 Series Color Mobile Computer User’s Manual...

  • Page 104: Pocket Excel

    To do so, open the workbook, tap Edit > Password. Ev- ery time you open the workbook, enter a password, preferably one that is easy for you to remember but hard for others to guess. 700 Series Color Mobile Computer User’s Manual...

  • Page 105: Tips For Working In Pocket Excel

    Then tap Format > Column > Un- hide. For more information on using Pocket Excel, tap Start > Help > Pocket Excel to see Pocket Excel Help. 700 Series Color Mobile Computer User’s Manual...

  • Page 106: Msn Messenger

    To set up an Exchange account, see your network administrator. For more information on using MSN Messenger, tap Start > Help > MSN Messenger to see MSN Messenger Help. To switch to MSN Messenger, tap Start > Programs > MSN Messenger. 700 Series Color Mobile Computer User’s Manual...

  • Page 107: Setting Up An Account

    Run this program upon connection box. S Signing in to an Exchange account may take several minutes depending upon your connection speed. Reducing the number of Exchange con- tacts decreases your sign-in time. 700 Series Color Mobile Computer User’s Manual...

  • Page 108: Working With Contacts

    To delete a contact, tap and hold the contact’s name, then tap Delete Contact from the pop-up menu. To see others online without being seen, tap Tools > My Status > Appear Offline. 700 Series Color Mobile Computer User’s Manual...

  • Page 109: Managing Contacts

    S To receive an alert when someone adds you to their contacts list, select Alert me when I am added to a Passport contact list. S To see who has you listed as a contact, tap View. 700 Series Color Mobile Computer User’s Manual...

  • Page 110: Sending A Message

    S To invite another contact to an ongoing chat, tap Tools > Invite and tap a contact. S To see who is already chatting or to switch between chats, tap Chats. Enter a message. Tap to send message. 700 Series Color Mobile Computer User’s Manual...

  • Page 111: Windows Media Player For Windows Mobile

    Tap to stop. Tap to play or pause. For more information about using Windows Media Player for Windows Mobile, tap Start > Help > Windows Media Player to see Windows Media Player Help. 700 Series Color Mobile Computer User’s Manual...

  • Page 112: Microsoft Reader

    Extras folder on the Windows Mobile Companion CD. Use ActiveSync to download the files from your desktop to your activated mobile computer as described in the Read Me file in the MSReader folder. 700 Series Color Mobile Computer User’s Manual...

  • Page 113: Using The Library

    3 To open a book, tap its title in the Library list. Tap to scroll through the Library list. Tap to select a sort order. Tap to open a book. Tap here to navigate to other parts of the Reader. 700 Series Color Mobile Computer User’s Manual...

  • Page 114: Reading A Book

    Tap arrows to turn the page, or tap and hold page number to bring up page riffle. You can also page through a book by using the Up/Down/Left/Right con- trols on your 700 Color Computer. 700 Series Color Mobile Computer User’s Manual...

  • Page 115: Using Reader Features

    To remove a book from your 700 Color Computer, tap and hold the title in the Library list, and then tap Delete on the pop-up menu. 700 Series Color Mobile Computer User’s Manual...

  • Page 116: Pocket Internet Explorer

    Favorites. For more information on using Internet Explorer, see Internet Explorer Help on the desktop. 3 Connect your 700 Color Computer to your desktop. If synchronization does not start automatically, in ActiveSync on your desktop, click Sync. 700 Series Color Mobile Computer User’s Manual...

  • Page 117: Mobile Favorites

    S Limit the number of downloaded linked pages. In Internet Explorer on the desktop, right-click the mobile favorite you want to change and then Properties. In the Download tab, specify “0” or “1” for the number of linked pages you want to download. 700 Series Color Mobile Computer User’s Manual...

  • Page 118: Using Avantgo Channels

    700 Color Computer without connect- ing to the Internet. You can also connect to the Internet through an ISP or a network connection and browse the Web. Favorites button Home button Refresh button 700 Series Color Mobile Computer User’s Manual...

  • Page 119: Viewing Mobile Favorites And Channels

    Tap the arrow to choose from previously entered addresses. Note: To add a favorite link while using the 700 Color Computer, go to the page you want to add, tap and hold on the page, and tap Add to Favorites. 700 Series Color Mobile Computer User’s Manual...

  • Page 120: Getting Connected

    700 Color Com- puter through the serial port. To view additional information for any screen in the wizard or while changing settings, tap the Help icon. 700 Series Color Mobile Computer User’s Manual...
  • Page 121 700 Color Computer into your modem dock. If you are using an external modem that is connected to your 700 Color Computer with a cable, select “Hayes Compatible on COM1.” Tap Next to continue. 700 Series Color Mobile Computer User’s Manual...
  • Page 122 If the ISP you are connecting to does not use a dynamically-assigned address, tap Advanced > the TCP/IP tab, tap Use specific IP address, then enter the address. Tap ok to close the Advanced page. 700 Series Color Mobile Computer User’s Manual...
  • Page 123 5 Tap the Advanced tab from the Connections screen, then tap Select Location to specify your current location. These settings apply to all connections. Tap Use dialing rules, tap OK,then tap Edit to continue. 741, 751, 761 Screens 730, 740, 750, 760 Screens 700 Series Color Mobile Computer User’s Manual...

  • Page 124: Connecting To Work

    Get a dial-up access telephone number, a user name, and a password from your network administrator. If your 700 Color Computer does not have access to a mobile phone network, insert your 700 Color Computer into a modem dock. 700 Series Color Mobile Computer User’s Manual...

  • Page 125: Creating A Modem Connection To Work

    Creating a Modem Connection to Work 1 Tap Start > Settings > the Connections tab > the Connections icon. Tap Add a new modem connection beneath My Work Network to ini- tiate this procedure. 700 Series Color Mobile Computer User’s Manual...
  • Page 126 In the Country/Region box, enter the appropriate code when dial- ing internationally. For more information, contact an operator at your local phone company. b In the Area code box, enter the area code. Area codes are not need- ed in all countries. 700 Series Color Mobile Computer User’s Manual...
  • Page 127 S You want to change baud rate settings, dialing string commands, or credit card options. S You need to change port settings. S The server you are connecting to does not use dynamically-assigned addresses, and you need to enter your TCP/IP settings. 700 Series Color Mobile Computer User’s Manual...

  • Page 128: Creating A Wireless Network Connection

    Creating a Wireless Network Connection Microsoft Corporation’s wireless network configuration tool is called “Wireless Zero Config.” Intermec Technologies recommends that you use the Wireless Network control panel applet instead as it offers more security choices and exhibit better roaming behavior. Information about the Wire- less Network control panel applet is in Appendix A.
  • Page 129 “Work,” you can do a vpn connection or use proxy servers. If you select “The Internet,” you can connect directly to the internet. To connect to an ad-hoc connection, select This is a device-to-device (ad-hoc) connection. 700 Series Color Mobile Computer User’s Manual...
  • Page 130 Set Data Encryption to “WEP.” c To change the network key, clear The Key is provided for me auto- matically box, then enter the new Network key and select the ap- propriate Key index. 700 Series Color Mobile Computer User’s Manual...
  • Page 131 Set Authentication to “WPA-PSK.” See page 364 for information about WPA encryption. b Set Data Encryption to either “WEP” or “TKIP.” See page 364 for information about WEP and TKIP encryption. c Enter the new Network key. 700 Series Color Mobile Computer User’s Manual...
  • Page 132 Tap ok to close this screen. Note: If you select to automatically connect to non-preferred networks, your device detects any new networks and provide you the opportunity to configure them. 700 Series Color Mobile Computer User’s Manual...

  • Page 133: Creating A Vpn Server Connection To Work

    Settings, and follow the instructions on the screen. 1 Tap Start > Settings > the Connections tab > the Connections icon. Tap Add a new VPN server connection beneath My Work Network to initiate this procedure. 700 Series Color Mobile Computer User’s Manual...
  • Page 134 “IPSec/L2TP” or “PPTP.” If you are not sure which option to choose, ask your network administrator. Tap Next to continue. 3 Select the type of authentication. If you select A pre-shared key, enter the key provided by your network administrator. 700 Series Color Mobile Computer User’s Manual...

  • Page 135: Ending A Connection

    S When connected via cable or cradle, detach your device. S When connected via Infrared, move the device away from the other computer or device. S When connected via a wireless network, switch off the connection. 700 Series Color Mobile Computer User’s Manual...

  • Page 136: Connecting Directly To An E-Mail Server

    1 On your 700 Color Computer, tap Start > Inbox to access the Inbox application. Tap Accounts > New Account. 2 Enter an e-mail address, tap Next, Cancel, then Next after the status of the automatic configuration is listed as “Completed.” 700 Series Color Mobile Computer User’s Manual...
  • Page 137 3 Enter the Your name and Password information, then tap Next. 4 Select the appropriate service type from the Account type drop-down list, either “POP3” or “IMAP4,” or enter a new account type, then tap Next. 700 Series Color Mobile Computer User’s Manual...
  • Page 138 When finished, to connect to your e-mail server, from the Inbox applica- tion, tap Accounts > Connect. For more information on using the Inbox application, see “Inbox: Sending and Receiving E-mail Messages” on page 73. 700 Series Color Mobile Computer User’s Manual...
  • Page 139 Installing Applications There are multiple ways to get an application to your 700 Series Color Mobile Computer; just as there are multiple ways to package the applica- tion for delivery. Note: “700 Color” pertains to 740, 741, 750, 751, 760, and 761 Com- puters unless otherwise noted.

  • Page 140: Packaging An Application

    700 Color Computer — providing the AutoRun system is installed in the appropriate location You can find this system in the 700 Color Management Tools portion of the Intermec Developer’s Library CD. Copying a CAB file to the “\CABFILES” folder on one of these cards automatically extracts that CAB file on every cold-boot to ensure that your system is properly set up (see page 124).

  • Page 141: Installing Applications

    Using Microsoft ActiveSync Note: These instructions assume the 700 Color Management Tools por- tion of the Intermec Developer’s Library CD was installed on your desktop. The Microsoft ActiveSync tool is located on the 700 Color Companion CD. See Chapter 2, “Windows Mobile 2003,” for information about this tool as provided by Microsoft Corporation.

  • Page 142: Using The Ftp Server

    3 Click Explore to access the Mobile Device folder on your unit. 4 From your desktop, select Start > Windows Explorer, then browse the “C:\Intermec\700C Mgmt Tools\CabFiles” path for any CAB files needed for your 700 Color Computer. Select the appropriate file, right- click the file for a pop-up menu, then select Copy.

  • Page 143: Copying To A Secure Digital Storage Card

    Updating the System Software You can use the Intermec Recovery CD to reinstall or update the operating system software on the 700 Color Computer. For more information, con- tact your Intermec representative.

  • Page 144: Application Migration

    1 From your desktop, double-click the Intermec CE Imager desktop icon to access the Intermec CEImager application. If this icon is not on your desktop, then double-click the CEIMAGER.EXE executable from the “C:\Intermec\700C Mgmt Tools\Tools\CEImager”...
  • Page 145 Any calls to the RegFlushKey() API automatically writes the registry to the appropriate location. Note: Both the warm-boot and the cold-boot procedures, via the software API, will also flush the registry. 700 Series Color Mobile Computer User’s Manual...

  • Page 146: Migrating From A 700 Monochrome Computer

    S Use the AUTOCAB method to extract all files when a cold-boot is per- formed on the 700 Series Computer. This method is on the Intermec Developer’s Library CD, see its Software Tools User’s Manual for informa- tion.

  • Page 147: Network Support

    Network Support The 700 Series Color Mobile Computer can integrate up to three radios in a single unit, and automatically installs the appropriate software for radio or phone use when the unit is powered on. Note: “700 Color” pertains to 740, 741, 750, 751, 760, and 761 Com- puters unless otherwise noted.

  • Page 148: Understanding Your 700 Series Computer

    Wireless Personal Area Network (page 182) Wireless Wide Area Network WWAN Communicator** X (future) WWAN Toolkit X (future) * Does not apply to WAN radios ** See the “WWAN Communicator User’s Guide” P/N: 074250. 700 Series Color Mobile Computer User’s Manual...

  • Page 149: Antennas (760/761 Computers)

    Below are the colors and their types. The 761 Computers in the United States and Canada use the external antenna with no color in its tip. See your Intermec representative for more information. S Red (760 Computers) CDMA (non-Sprint networks) and GSM/GPRS US/Canada...

  • Page 150: Ethernet Communications (740, 741, 750, 751, 760, 761 Computers)

    When “Built-in Ethernet” is selected from the NDISTRAY pop-up menu (the Network Driver Interface Specification tray application), then the Ethernet icon shown to the left appears in the System Tray as circled in the following illustration. 700 Series Color Mobile Computer User’s Manual...

  • Page 151: Wireless 802.11 Communications

    Computer, tap Start > Settings > the System tab > the Wireless Network icon to access the Profile Wizard for the 802.11b or 802.11b/g radio module. Go to Appendix A, “Configurable Settings,” for configuration information. 700 Series Color Mobile Computer User’s Manual...

  • Page 152: No Networking

    The Network Selection APIs change the network adapter configuration programmatically. Both drivers support the same IOCTL function num- bers for loading and unloading the drivers. Go to Chapter 7, “Program- ming,” to see the APIs. 700 Series Color Mobile Computer User’s Manual...

  • Page 153: Network Connections

    S The “802.11b PRISM Wireless LAN” option is for 750 and 760 Com- puters with standard 802.11b radios. S The “802.11b/g Wireless LAN” option is for 751 and 761 Computers with the latest 802.11b/g radios. 730 Screen 700 Color Screen 700 Series Color Mobile Computer User’s Manual...

  • Page 154: Core (760, 761 Computers With Wan Radios)

    CORE (760, 761 Computers with WAN Radios) The Intermec CORE application provides a framework for various mod- ules that let you configure and manage your Intermec products. If a mod- ule is not yet used or set, CORE defaults to the first module as listed al- phabetically.

  • Page 155: Loading A Radio Module

    802.11b or 802.11b/g radio option built into your 760 or 761 Computer. Note that you can configure the 802.11b or 802.11b/g radio module from this CORE application. Select Configure > Configure Intermec 802.11 CF from the bottom menu bar to access the Profile Wizard application.

  • Page 156: General

    When this icon appears with a red line, the radio is disconnected or nearly so from the access point. 700 Series Color Mobile Computer User’s Manual...

  • Page 157: Details

    Code Division Multiple Access (CDMA) is a form of wide area wireless communications. 1XRTT supports up to 144 KB per second packet data transmission. The WAN radio CORE module displays helpful information about the CDMA/1xRTT radio option built into your 760 Computer. 700 Series Color Mobile Computer User’s Manual...

  • Page 158: Wan Monitor — General

    Usually indicates the signal strength for this radio module. Three filled dots indicate a high quality or strong signal. Three empty dots indicate that the signal is out of range or there is no signal detected. 700 Series Color Mobile Computer User’s Manual...

  • Page 159: Wan Monitor — Details

    (abbreviation for receive) Indicates the number of bytes received over the WAN connection since the CORE WAN Module was started. (abbreviation for transmit) Indicates the number of bytes received over the WAN connection since the CORE WAN Module was started. 700 Series Color Mobile Computer User’s Manual...

  • Page 160: Gsm/Gprs Core Module (760 Computers With Wan Radios)

    A status of “Serial com FAIL” typically indicates that the 760 Computer is unable to establish communication with the radio module installed within. History: This bar graph displays an active history of this radio module’s quality of connections. 700 Series Color Mobile Computer User’s Manual...

  • Page 161: Wan Monitor — Details

    Displays the RSSI frequency or lists “Unavailable” if there is no signal or the signal cannot be retrieved from the radio module. SIM Status Identifies whether a SIM card is installed in this 760 Computer. 700 Series Color Mobile Computer User’s Manual...

  • Page 162: Microsoft Phone Application (761 Computers With Cdma Radios)

    1 From the Phone application, tap Tools > Activation Wizard. 2 Have your activation code, phone number (MDN), and MSID infor- mation ready before you tap Next to continue. You can get this infor- mation from your network provider. 700 Series Color Mobile Computer User’s Manual...
  • Page 163 Chapter 4 — Network Support 3 Enter your 6-digit activation code, then tap Next to continue. 4 Enter your phone number and MSID from Sprint, then tap Next to continue. 700 Series Color Mobile Computer User’s Manual...
  • Page 164 “Data Provi- sioning” on page 140 to manually launch data provisioning. The application acknowledges that your phone will be in service in four hours. Tap Finish to close the wizard. 700 Series Color Mobile Computer User’s Manual...

  • Page 165: Phone Application

    Tap this to view your previous calls. Tap this to “hang up” your current call. Tap this toggle the mute option. Tap this to access the Contacts application. Tap this to access the Notes application. 700 Series Color Mobile Computer User’s Manual...

  • Page 166: Speed Dial

    To add to this list, use the Contacts applica- tion. See Chapter 2, “Windows Mobile 2003,” for more information about the Contacts application. Call History Tap Call History to note the telephone numbers that were previously dialed from this 761 Computer. 700 Series Color Mobile Computer User’s Manual...

  • Page 167: Tools

    SMS (Short Messaging Service) message. Be sure to have an SMS num- ber ready to send the message — this is usually the mobile phone num- ber. See Chapter 2, “Windows Mobile 2003,” for information about the Inbox application. 700 Series Color Mobile Computer User’s Manual...

  • Page 168: Phone Settings

    & Notifications control panel applet. Select Start > Help for more online information about this feature. S Tap the Location tab to toggle between letting your location be visible for everyone to detect and hiding your location from everyone except 911. 700 Series Color Mobile Computer User’s Manual...

  • Page 169: Activation

    Sprint network, by attempting to make a cellular line connection to the WAN before the 761 Computer is data provisioned, or by manually starting the connections through this screen. Intermec recommends that Sprint Network “push” the data provisioning to your unit. This should oc- cur shortly after the voice activation is complete.
  • Page 170 Chapter — Network Support S Tap the Phone Info tab to view the phone settings. 700 Series Color Mobile Computer User’s Manual...

  • Page 171: Phone Application

    Tap this to dial the phone number shown above the keypad. Tap this toggle the mute option. Tap this to access the Contacts application. Tap this to access the Notes application. 700 Series Color Mobile Computer User’s Manual...

  • Page 172: Call History

    Tap Speed Dial to select a telephone number with which the 761 Com- puter is to dial automatically. To add to this list, use the Contacts applica- tion. See Chapter 2, “Windows Mobile 2003,” for more information about the Contacts application. 700 Series Color Mobile Computer User’s Manual...

  • Page 173: Tools

    S Tap the Phone tab to customize your phone settings such as the ring type and ring tone to use for incoming calls, and the keypad tone to use when entering phone numbers. Tap Other Settings to go to the Sounds & Notifications control panel applet. 700 Series Color Mobile Computer User’s Manual...
  • Page 174 S Tap the Services tab to access settings for any of the provided services. Tap any of the settings, then tap Get Settings. Make your changes, then tap ok to return to the Settings screen. Below is a sample Settings screen. 700 Series Color Mobile Computer User’s Manual...
  • Page 175 Chapter 4 — Network Support S Tap the Network tab to find, set, or select the type of network on which this phone is to communicate. 700 Series Color Mobile Computer User’s Manual...

  • Page 176: Phoneutility (760 Computers With Gprs Radios)

    S Tap End to disconnect a transaction. S Drag the Vol slider up or down to adjust the speaker volume. S Drag the Mic slider up or down to adjust the microphone sensitivity. Speakerphone Audio Mode Handset Audio Mode 700 Series Color Mobile Computer User’s Manual...

  • Page 177: Notification

    OK or ok to return to the Audio Mode screen. If you need to adjust the audio settings, tap Advanced Audio to continue. Advanced Audio Tap ok to close the warning and continue. 700 Series Color Mobile Computer User’s Manual...
  • Page 178 Click OK or ok to return to the Notification screen. Speakerphone Output/Input Levels Handset Output/Input Levels Tap ? for more information on these level settings, then click ok or OK to return to the Output/Input Levels screen. 700 Series Color Mobile Computer User’s Manual...

  • Page 179: Sb555 Watcher (760 Computers With Cdma Radios)

    5 From beneath the “Sierra Wireless ‘Watcher’ Application” title, down- load any of the CAB files shown, then choose your carrier CAB files. Intermec recommends one of two methods with which to load these CAB files onto your 760 Computer: via the Microsoft ActiveSync application (next paragraph) or via a CompactFlash or Secure Digital storage card (next page).

  • Page 180: Via Microsoft Activesync

    ActiveSync. See Chapter 2, “Windows Mobile 2003” for more infor- mation about ActiveSync. 1 Obtain software from the Intermec web site as described earlier. Down- load the software to any location on your 760 Computer, such as the Temp folder via the My Device root location.

  • Page 181: Finishing The Installation

    2 Tap Yes, I accept to accept the license agreement, then tap OK to con- tinue. Note that this license agreement does not appear again after this installation. 3 Tap OK for the 760 Computer to perform a warm-boot and complete the installation. 700 Series Color Mobile Computer User’s Manual...

  • Page 182: Activation

    Intermec Technologies does not recommend using the SB555 Watcher program to make data and voice calls on a daily basis for these reasons: S The SB555 Watcher application is a third-party application unaware of certain power management methods used in your 760 Computer.
  • Page 183 1 Tap Start > Programs > the Watcher icon or tap the Watcher icon from the NDISTRAY via the Today screen (circled in the following illustra- tion) to launch the SB555 Watcher program. 700 Series Color Mobile Computer User’s Manual...
  • Page 184 5 At the appropriate screen, enter the Activation Code (OTSL, MSL, OTKSL, or SPC) provided by your carrier and tap Next. 6 Enter the phone number provided when your 760 Computer was acti- vated and tap Next. 700 Series Color Mobile Computer User’s Manual...

  • Page 185: Verizon Automated Activation Process

    2 Start the Watcher program again, select Automated Activation, then click Next. Note: You must be in the Verizon coverage area to activate your 760 Computer and only in the location of intended use. 700 Series Color Mobile Computer User’s Manual...
  • Page 186 Chapter — Network Support 3 Click Next, click Next again to dial the number displayed on the screen. 4 The activation process starts automatically. 700 Series Color Mobile Computer User’s Manual...
  • Page 187 Chapter 4 — Network Support 5 You will see a series of unlock codes on your screen. 6 The following illustration shows the result of a successful activation. 700 Series Color Mobile Computer User’s Manual...
  • Page 188 8 Select Start > Internet Explorer, then choose a web site. Your unit is now successfully activated. 9 Perform a cold-boot on your 760 Computer to uninstall the Watcher application. Watcher is intended for activation purposes only. Intermec recommends using the following for establishing and maintaining con- nection to the WAN radio.

  • Page 189: Sprint Automated Activation Process

    Registry Save tab. Clear the Enable Registry Save box. 2 Perform a cold-boot on your 760 Computer, then go through the nor- mal Pocket PC set-up (i.e. Align Screen etc.). 700 Series Color Mobile Computer User’s Manual...
  • Page 190 (circled in the following illustration). 7 In the NDISTRAY pop-up menu (the Network Driver Interface Speci- fication tray application), select No Networking and Auto FTP Off. Tap anywhere on the screen to close the menu. 700 Series Color Mobile Computer User’s Manual...
  • Page 191 SB555 Watcher program. 9 Tap Yes, I accept to accept the license agreement, then tap OK to con- tinue. Note that this license agreement does not appear again after this installation. 700 Series Color Mobile Computer User’s Manual...

  • Page 192: Using Sprint Watcher

    1 Tap Start > Programs > the Watcher icon or tap the Watcher icon from the NDISTRAY via the Today screen (circled in the following illustra- tion) to launch the SB555 Watcher program. 700 Series Color Mobile Computer User’s Manual...
  • Page 193 Network Support 2 If your 760 Computer was not previously activated, Watcher automati- cally starts the Activation Wizard. Otherwise, select Manual Activation to continue. 3 Enter the MSL or lock code received from Sprint. 700 Series Color Mobile Computer User’s Manual...
  • Page 194 Note: If the “searching for SB555” screen does not proceed to the next screen after 30-40 seconds, perform a warm-boot on your 760 Comput- er, then restart the Watcher program. 700 Series Color Mobile Computer User’s Manual...

  • Page 195: Data Provisioning

    1 If Data Provisioning does not start automatically, select Admin > Data Provisioning from the bottom menu bar. 2 Tap Yes to proceed with data provisioning. 700 Series Color Mobile Computer User’s Manual...
  • Page 196 S If after several attempts to complete the Data Provisioning over the air, it may be necessary to manually enter the data activation method. S Go to Intermec Knowledge Central www.intermec.com, then select Ser- vice & Support > Knowledge Central) to learn about manual activa- tion.
  • Page 197 4 Test the data connection by tapping on the “connect” button to make a data connection to the network. Watcher progresses through the follow- ing two screens. Once you see the second screen you know that your mobile computer has successfully connected to the 1XRTT network. 700 Series Color Mobile Computer User’s Manual...

  • Page 198: Telus And Bell Mobility Activation

    5 Select Start > Internet Explorer, then choose a web site. Your unit is now successfully activated. Perform a cold-boot on your 760 Computer to uninstall the Watcher ap- plication. Watcher is intended for activation purposes only. Intermec rec- ommends using the following for establishing and maintaining connection to the WAN radio.

  • Page 199: At Command Interface (760 Computers)

    GPRS/GSM MC45 or MC46 radio module. The “MC45 Siemens Cellular Engine AT Command Set” and the “MC46 Siemens Cellu- lar Engine AT Command Set” are available either from Intermec Technolo- gies or from Siemens AG. Contact either your Intermec representative or the Siemens AG support personnel at the following URL for more infor- mation.

  • Page 200: Testing The At Commands

    > Connections. Under My ISP, tap Add a new modem connection. 2 Enter a name for the connection, select “WANA on COM4” from the Select a modem drop-down list, then tap Next to continue. 700 Series Color Mobile Computer User’s Manual...
  • Page 201 3 Enter a phone number as it should be dialed, then tap Next to continue. Select Start > Help for more information or tap use dialing rules to make modifications. Note that this screen may vary based on dialing rules. 4 Tap Advanced to continue. 700 Series Color Mobile Computer User’s Manual...
  • Page 202 5 Select “115200” from the Baud rate drop-down list via the General page. 6 Tap the Port Settings tab, check Enter dialing commands manually, then tap ok Finish to return to the Connections screen. , then 700 Series Color Mobile Computer User’s Manual...
  • Page 203 Note that each “AT” com- mand must start with the “at” characters. S To see what you typed onscreen, type “ate1” to initiate the AT Echo command, then press Enter. 700 Series Color Mobile Computer User’s Manual...

  • Page 204: Wireless Personal Area Networking

    Documentation Information about other Bluetooth software is in the Wireless Printing SDK and the Wireless Printing Development Guide (on the Intermec Devel- oper’s Library CD, via the “\Wireless Printing SDK” directory off the root). About the Application Bluetooth is not started automatically by default after a cold-boot is per- formed.

  • Page 205: Wireless Printing

    Print Test Page. Check Default to set this printer to identify the assigned COM Port as the WPPort in the registry. See the Wireless Printing Development Guide for more details on WPPort. 700 Series Color Mobile Computer User’s Manual...

  • Page 206: File Transfer

    IrDA file transfer. To transfer a file, tap Start > Programs > File Explorer and locate the file to transfer. Press and hold on the file for a pop-up menu, then select Beam File. 700 Series Color Mobile Computer User’s Manual...
  • Page 207 When the list is complete, tap on a device to which to send the file. Note: in some cases, the user of the target device has to “accept” the file before it is transmitted. 700 Series Color Mobile Computer User’s Manual...

  • Page 208: Autoip/Dhcp

    Note: To extend the number of attempts that a DHCP client makes to get a DHCP address, use the DhcpRetryDialogue and DhcpMaxRetry registry settings. Note: Change the AutoInterval registry key value to make the client retry more often to obtain a DHCP address. 700 Series Color Mobile Computer User’s Manual...

  • Page 209: Snmp Configuration On The 700 Color Computer

    The MIB is a structured collection of such objects. You will find the following MIB files either in the 700 Color Management Tools portion of the Intermec Developer’s Library CD or on the web via www.intermec.com: S INTERMEC.MIB...

  • Page 210: Object Identifiers

    The Intermec base OID is 1.3.6.1.4.1.1963. 3 Use your SNMP management station to get and set variables that are defined in the Intermec MIBs. You can set the traps, identification, or security configuration parameters for SNMP. See Appendix A, “Confi- gurable Settings,”...

  • Page 211: Printer Support

    Printer Support The 700 Series Color Mobile Computer works with the following printers from Intermec Technologies. Contact an Intermec representative for infor- mation about these printers. S 6820 A full-page, 80-column printer. S 6808 A 4-inch belt-mount printer. S PB20 A 2-inch belt-mount printer with a Bluetooth compatible module from Socket Communications.

  • Page 212: Printing Ascii

    Win32 APIs are required to print di- rectly to the port. Directly to a Generic Serial Port To print directly to a generic serial port printer (non-Intermec printers): S Use CreateFile() to open ports — COM1 can be opened on most de- vices.

  • Page 213: Npcp Printer Driver

    About NPCP ® NPCP (Norand Portable Communications Protocol) is a proprietary protocol that provides session, network, and datalink services for Intermec mobile computers in the Intermec LAN environment used with printers and data communications. NPCP Driver Installation and Removal Use LPT9: for the NPCP printer device and COM1 for the last parame- ter.

  • Page 214: Opening The Npcp Driver

    The print data written to the driver must contain the proper printer commands for formatting. If the function returns FALSE, the NPCP error may be retrieved using IOCTL_NPCP_ERROR. See the description on the next page. 700 Series Color Mobile Computer User’s Manual...

  • Page 215: Npcp Driver I/O Controls

    If an error oc- curs during the polling process, the operation will return FALSE and the application can get the extended error code by using IOCTL_NPCP_ERROR. No parameters are required. 700 Series Color Mobile Computer User’s Manual...

  • Page 216: Npcp Printer Communications

    IOCTL, then use IOCTL_NPCP_ERROR to get the error and determine the correct recovery procedure. Sample Code See sample code in the “\700C Dev Tools\Installable Drivers\Port Drivers\Npcp\NPCPPrint\” directory for more details on printing, printer communications and error code handling. 700 Series Color Mobile Computer User’s Manual...

  • Page 217: Npcp Error Codes

    #define HEADFAULT (BYTE)228 // printer head short or driver short error #define PFFAULT (BYTE)229 // paper feed motor fault. #define FRAME_NOT_ACKED 0x8000 // frame was not received by printer and need to be resent. 700 Series Color Mobile Computer User’s Manual...

  • Page 218: O'neil Printer Driver

    You may use DeregisterDevice() to uninstall the driver. Install() HANDLE hDevice; TCHAR port[6]; port[0] = TCHAR(‘C’); port[1] = TCHAR(‘O’); port[2] = TCHAR(‘M’); port[3] = TCHAR(‘1’); port[4] = TCHAR(‘:’); port[5] = TCHAR(0); hDevice = RegisterDevice ( (TEXT(”DTR”), 1, TEXT(”\\WINDOWS\\ONEIL.DLL”), (DWORD)port); 700 Series Color Mobile Computer User’s Manual...

  • Page 219: Opening The Dtr Driver

    1 Use CreateFile() to open the printer driver. 2 Use WriteFile() to write your data to the printer. Check for errors and that all data were written. 3 Use CloseHandle() to close the driver. 700 Series Color Mobile Computer User’s Manual...
  • Page 220 Chapter — Printer Support 700 Series Color Mobile Computer User’s Manual...

Table of Contents