Cleaning and changing the fi lter
GB
■
■
18
The performance of the appliance also depends upon how clean the fi lter is.
The plastic fi lter
9
should be washed every 2 weeks.
The carbon fi lter
should be cleaned every 2 weeks and changed every 6
10
months.
NOTE
►
You can purchase new carbon fi lters in almost all shops selling household
goods. The carbon fi lter mats just need to be cut to size.
♦
Switch the appliance off and remove the mains plug.
♦
Remove the water tank
♦
To remove the air inlet grille
air inlet grille
must be pressed upwards slightly to allow release.
8
♦
Remove the air inlet grille
♦
To remove the plastic fi lter
plastic fi lter
9
must be pressed downwards slightly to allow release.
♦
Now, remove the plastic fi lter
ance by pulling it downwards.
♦
The carbon fi lter
10
♦
First remove the plastic fi lter
♦
Now remove the carbon fi lter
♦
Wash down both fi lters with lukewarm water.
♦
Allow both fi lters to dry completely before re-inserting the fi lter in the
appliance.
♦
To insert, follow the reverse sequence.
5
from the appliance.
8
, three plastic lugs located at the base of the
in a downwards motion.
8
, two plastic lugs located at the base of the
9
9
including the plastic frames from the appli-
is also located behind the plastic fi lter
from the plastic frames.
9
.
10
8
.
9
10
9
SLE 320 A1