Tube Drainage - Silvercrest SLE 320 A1 Operating Instructions Manual

Hide thumbs Also See for SLE 320 A1:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 4

Tube drainage

GB
16
In very damp rooms, it is often more appropriate for the water not to collect in
the water tank, but for it to be drained directly by means of a tube.
WARNING
When draining via the tube, sustained operation of the appliance is man-
dated. This means that the condensate must be able to drain securely so
that no pooling forms on the fl oor.
Using a screwdriver, prise open the closure
ance and remove the plug
Position the tube
25
for the drainage tube.
Then insert the plug
13
Fig. 2
Set up the appliance such that the end of the tube is positioned over a drain.
Thus, the open end of the tube must be positioned beneath the appliance's
outlet (i.e. the tube must slope downwards).
Switch on the appliance as usual and select a programme.
If you wish to drain the water tank
draw the tube
25
and remove the plug
water tank and insert it again into the outlet aperture for the drainage tube.
.
14
, supplied with the appliance, over the outlet aperture
into the outlet aperture for the water tank (see Figure 2).
14
25
14
again, switch off the appliance, with-
5
14
on the reverse of the appli-
13
from the outlet aperture for the
SLE 320 A1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents