Appendixi - Mounting Template; Figure 28: Mounting Template - CipherLab 5000 Hardware Manual

A I – M
PPENDIX
This mounting template is provided in actual size (1:1 scale).
1. Place this paper on the place you desire to mount the terminal.
2. Use paper tape to attach it on the surface.
3. Then use a power drill to drill holes on the four corners.
The size of these holes is 6mm in diameter and 21mm in depth.
Make sure that your printout doesn't zoom in/out during printing.

Figure 28: Mounting template

T
OUNTING EMPLATE
75