Status Leds; Buzzer; Readers; Table 5: Types Of Readers - CipherLab 5000 Hardware Manual

1.3.6 Status LEDs

There are four indicators on the front panel for status feedback. They are
programmable for diagnostics and application dependant.
Red LED – Power
Green LED – Good Read
Yellow LED – 485 Comm.
Orange LED – Host Comm.

1.3.7 Buzzer

The buzzer is a low power transducer type, and its pitch and duration are software
programmable.

1.3.8 Readers

Two types of readers are supported:
125 KHz EM:
13.56 MHz, Philips Mifare:

Table 5: Types of readers

A second reader can be attached via the JP2 "external reader port". Please note that
these are "CMOS level" (0~+5V) signals. A +5V output is also available on the JP2
and can be used to power this external reader.
14
Introducing 5000/5100:
From contact to 6 cm
From contact to 6 cm
Features