Activate - CipherLab 5000 Hardware Manual

4.4.2 Activate

Screen 21: Program Manager> 2. Activate
The list shows the entire spare programs stored in the terminal. From the list, you can
select from 01 to 06 and activate one of them.
When an application program is activated, it will be copied to the active memory
and replace the old one.
The <New Program Start> screen instructs that "Press [ESC] to clear file". It
means the file system in the SRAM will be cleared out when pressing [ESC]. Then
there will be no data (transactions, settings, etc.) stored in the terminal when the
new program comes into effect. To keep the data, simply press any other key.
When a font file is activated, it will replace the system font. The active application
program will remain intact.
Configuring 5000/5100:
Program Manager
63