3.3 Management
Install a management utility at PC end that corresponds to the current application.
Then, proceed to define the environments for the terminal to work.
Please see programming guide for details.
The terminal must be loaded with an appropriate application first.
Proprietary Management Software for 5100*.SHX:
The software is in correspondence to proprietary application programs.
Several PC end utilities are available for remote management. For example,
-
Menjin.exe is for access control system.
Aided by OCX support, customized management utilities can be developed.
-
-
Command sets are mainly for managing the terminals. Yet, sending commands
from a host can do part of the configuration as well.
Alternatives:
The custom management software is specifically in correspondence to user-defined
application programs.
Table 16: Management programs
38
System Architecture:
Management