Table 22: Downloading Active Program Or Font - CipherLab 5000 Hardware Manual

Active application program or font file
The active slot:
1. Select the active program (may be an empty slot) by pressing the corresponding
number (that is 7) and then [Enter].
2. Set matching parameters at PC end: 115200, none, 8, 1
3. Connect cable and wait connecting...
4. If the downloaded program is an application, it will replace the active program and
come into effect immediately.
5. If it is a font file, then the current active program is still in use.

Table 22: Downloading active program or font

No font file will replace the active application program.
The new font file may not be shown in the program list if all slots are taken by
application programs, but you can view font information under System Menu>
Settings> Font.
62
Configuring 5000/5100:
Program Manager
>> Also see Section 4.3.2 Settings