Test the LCD display and LED indicator.
Press [Enter] to start. Press any key to stop and exit the test.
You may only be able to test the LED indicators on the 5000 terminals.
Test the rubber keys.
Press any key and its corresponding character will be shown on the screen.
Press [ESC] to stop and exit the test.
Without a screen, this is not available on the 5000 terminals.
Test the reading performance of the RFID reader when a proximity card is present.
Press [ESC] to stop and exit the test.
Without a screen, this is not available on the 5000 terminals.
Configuring 5000/5100:
Tests > LCD & LED
Tests > Keyboard
Tests > RFID
System Menu
49