Figure 17: Assembling Enclosures - CipherLab 5000 Hardware Manual

Figure 17: Assembling enclosures

Assembling Enclosures from Bottom to Top
10. Make sure there is no more need to do hardware configuration and/or
downloading application program.
At last, position the two tabs at the bottom of the upper enclosure into the notches
at the bottom of the lower enclosure. The two pieces of enclosures snap to fit.
11. Apply two M2x6 screws to secure the upper enclosure to the lower enclosure on
top.
12. Connect the power adaptor to an outlet.
When being installed for the first time, both the battery pack and the button cell for memory
backup take a certain time to be fully charged.
Installing 5000/5100:
Connecting to Power
Setting up the terminal
27