Wiring; Table 9: Types Of Interfaces; Figure 18: Terminal Blocks - CipherLab 5000 Hardware Manual

2.2 Wiring

This section gives instructions on how to wire the terminal to external devices, a host,
or another terminal.
RS-232 (JP3)
RS-485 (JP3)
Digital inputs (JP3)
Digital outputs (JP2)

Table 9: Types of interfaces

To ease installation and maintenance, most of the wirings (except for the Ethernet)
are through JP2 and JP3. These connectors are detachable terminal blocks. That
means, soldering is not required and these terminal blocks can be separated from the
main PCB easily.

Figure 18: Terminal blocks

28
Installing 5000/5100:
Connect to a host computer
Connect to another terminal
Connect to external devices like an actuator (button) to
open door
Connect to external devices like door lock, siren, etc.
Wiring