4.5.2 Load Program
The terminal must be configured correctly for downloading either of the following:
Program update
New application program
Font file
1. Connect RS-232 cable.
2. Set communication parameters at PC end: 115200, none, 8, 1.
3. Enter Kernel Menu> Load Program.
The system is ready to download the program to the active slot.
Only RS-232 interface is allowed.
Results
Success: the new program or font file will be activated right after downloading.
Failure: the terminal will resume to the current application program or font
Configuring 5000/5100:
Kernel Menu
67