Empty slot:
1. Select an empty slot by pressing the corresponding number and then [Enter].
2. Select baud rate for downloading. Set matching parameters at PC end.
3. Connect cable and wait connecting...
4. To abort the action, press [ESC]. Then press [ESC] again to return to the menu.
Occupied slot:
If no available slots, you'll have to replace one program with the new one.
1. Select a program that you want to delete by pressing the corresponding number
and then [Enter].
2. The program information is displayed on the screen. Press [Alpha] to enter the
capital mode. Then press [C].
3. Select baud rate for downloading. Set matching parameters at PC end.
4. Connect cable and wait connecting...
5. To abort the action, press [ESC]. Then press [ESC] again to return to the menu.
From the menu, you'll find the program is deleted but no new program is present.
If you simply want to delete a program, press [D] in step 2.
Table 21: Downloading spare programs
[C], [D]: press the keypad to produce C or D when in the capital mode A.
Configuring 5000/5100:
Spare application programs
Program Manager
61