Unpacking The Product - XYZ Printing Da Vinci Jr. 2.0 Mix User Manual

Open the box and remove the
1
accessories and cushions.
Remove all fixing tape and the
3
cushion between print bed and
extruder module.
5
Be sure to remove the
paper cardboard on the left side.
Refer to page 5 to install the filament guide tube and
8
extruder, and then insert the SD card that came with
the printer into your computer or download the latest
XYZware from the official Website and install it on the
computer.
Note: please use the original power adapter and power cord along with the printer in order to
prevent product damage or safety hazards caused by differences in voltage specifications.

Unpacking the Product

Remove the plastic bag and
2
the tape.
4 Remove the securing styrofoam and fixing tape on the print
bed.
Be sure to remove the fixing
6
cushion on the right side.
Use the USB cable to connect the printer to your
9
PC. Connect the power cord to the printer then
turn on the power switch.
da Vinci Jr.2.0 Mix
7
Be sure to remove the fixing
tape at the back and front of
the print bed.
July 2016
P 4