Table of Contents
Advertisement
1
Open the box and remove
t h e a c c e s s o r i e s a n d
cushions.
Raise the paper cardboard slightly upwards so
4
that the paper cardboard is detached from the
styrofoam slot at the bottom.
6
Remove the securing styrofoam next to the print bed.
Insert the SD card that came with the printer into
7
your computer or download the latest XYZware from
the offi cial Website and install it on the computer.
Note: please use the original power adapter and power cord along with the printer in order to
prevent product damage or safety hazards caused by differences in voltage specifi cations.
Unpacking the Product
HD23F1J00H1
2
Remove the plastic bag
and the tapes.
3
Raise the paper cardboard slightly upwards
so that the paper cardboard is detached from
the styrofoam slot at the bottom.
Remove 2 foams at the back of the cardboard.
5
Use the USB cable to connect the printer to PC.
h USB
bl
8
Connect the power cord to the printer then turn on
the power switch.
da Vinci Jr.1.0
2015
July
h
i
P 3
Advertisement
Table of Contents
