C h a p t e r
Voice Typical Configurations
SIP Typical Configuration
Step 1 Select Protocol Type
1. Click the VOIP button on the WEB page to enter the VOIP
configuration page.
2. Click the General link on the left part of the page to enter
the General configuration page for VOIP.
3. Select SIP from the Signaling protocol box.
4. Set the Length and Prefix of the internal phone number
from Ext. number setup.
5. Whether enabling Two-stage dialing flag.
6. Click the Apply button to finish the SIP protocol selection.
1 0
Confidential and Proprietary Information of ZTE CORPORATION
129