Mgcp Typical Configuration; Step1 Select Protocol Type - Zte ZXV10 H11X User Manual

ZXV10 H11X (V1.0)Home Gateway User's Manual

MGCP Typical Configuration

Step 1 Select Protocol Type
1. Click the VOIP button on the WEB page to enter the VOIP
configuration page.
2. Click the General link on the left part of the page to enter
the General configuration page for VOIP.
3. Select MGCP from the Signaling protocol box.
4. Set the Length and Prefix of the internal phone number
from Ext. number setup.
5. Whether enabling Two-stage dialing flag.
6. Click the Apply button to finish the MGCP protocol
selection.
132 Confidential and Proprietary Information of ZTE CORPORATION