Snmp Configuration - Zte ZXV10 H11X User Manual

Protocol
Protocol type of incoming data flow, in the range of ANY,
TCP, UDP and ICMP
Source IP Address
Source IP address of the incoming data flow
Source Netmask
Source address mask of the incoming data flow
Destination IP Address
Destination IP address of the incoming data flow
Destination Netmask
Destination address mask of the incoming data flow
Source Port
Destination port of the incoming data flow
Destination Port
Destination port of the incoming data flow
Rate
Controlling rate of this data flow, in the unit of kbps(kbit/s)

SNMP Configuration

As the Simple Network Management Protocol widely adopted on
Internet, SNMP is set up over the UDP in TCP/IP protocol cluster to
manage the network through the highly efficient NMS, provide
wireless connection service, and timely report and handle network
As configuring the ingress rate limit rule, if you
Note:
select ICMP for Protocol, then Source Port and
Destination Port cannot be configured.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 5 - Advanced Configuration
71