Table of Contents
Advertisement
Selecting name of the protocol; The options include ANY
(which indicates any protocol), IP, ARP, PPPoE SESSION,
PPPoE DISCOVERY and RARP.
Source Mac
Source MAC address setting
Destination Mac
Destination MAC address setting
For
example:
00:d3:c4:17:08:ba,
00:2d:30:51:11:23, and protocol as ANY, and then click Add to add
an entry. You can also select an entry to be edited or deleted, and
then click Submit to edit or delete it.
On the Bridge Filter page, you may choose to only configure the
source MAC address for the filter.
Setting IP Filter
Click the IP Filter link on the left part of the WEB page to enter the
IP Filter page, where you can define a port access filter policy by
using the IP address of the ingress interface of the H110 as the
source and the IP address of the egress interface as the destination.
At most 16 IP filter entries can be configured.
configure
the
destination
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 6 - Security Configuration
source
MAC
MAC
address
as
address
as
85
- Quick Links:
- Snmp Configuration
- Port Forwarding
- Port Trigger
Hide quick links:
Advertisement
Table of Contents
