Zte ZXV10 H11X User Manual page 137

Problem
I cannot make
a .
call
Configuration
made Web
at
page is lost
after restart.
Recommended Solution
Check firstly if the phone set connected to the
PHONE1 or PHONE2 interface
beeps normally. If yes, it means the phone set
is connected properly.
Enter the WEB
VOIP button and check the VOIP Status filed
on the General page. Ensure that the phone
port is registered, that is, it is in service. If it is
not registered, please check the SIP or MGCP
configuration by referring to VOIP configuration
in Chapter 7.
If the
port
connection is proper. Contact the service
provider if you still cannot make a call.
Make sure you click the Submit button for confirmation
after every modification.
setting, you should click the Save button or enter the
Tools page to click the Save All button to save it. Only
in this way, can your configured parameters take effect
after the H110 is powered on next time.
Confidential and Proprietary Information of ZTE CORPORATION
Appendix A - Solutions to Common Problems
of the H110. Click the
interface
status is in service, it means the
completing corresponding
After
the H110
of
137