Checking Configuration - Zte ZXV10 H11X User Manual

Checking Configuration

After the above preparations, switch on the H110. You will see that
the power indicator is on. At the same time, the H110 executes the
device start-up process and detects all the connected devices. From
the indicators, you can see the devices of which network interfaces
are successfully
corresponding to the network interface with successful device
connection will be always on.
In addition, you can use the Ping command to check the network
connection between the PC and the H110 by taking the following
steps:
Click the Start button, and select Run.
Key in cmd in the pop-up Run dialog box and then press Enter.
Key in ping 192.168.1.1 at the cursor position in the pop-up
interface and then press Enter
appears:
Pinging 192.168.1.1 with 32 bytes of data:
Reply from
TTL=64
It indicates that the PC has been successfully connected to the
H110.
If the following information occurs:
Pinging 192.168.1.1 with 32 bytes of data:
Request timed out.
It indicates an error occurs in the installation. Please check the
following items in turn:
connected with
192.168.1.1:
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 - Preparations for Configuration
the H110.
.
If the following information
bytes=32 time=2ms
The indicator
29