Lubrication Points - Kubota K008-3 Operator's Manual

BLubrication Points
To avoid personal injury:
A First lower all attachments on the
ground then stop the engine.
A While greasing, take care not to step
on the bucket teeth.
A When doing excavation work in water,
generously
points. After finishing work, grease
again.
Grease the marked grease fittings shown by
arrows in the illustration below.
1. Boom bottom linkage ....................... 1 place
2. Arm bottom linkage .......................... 1 place
3. Boom cylinder boss ........................ 2 places
4. Arm cylinder boss ........................... 2 places
5. Bucket cylinder pin ........................... 1 place
6. Boom swing fulcrum ....................... 2 places
7. wing cylinder boss ............................ 1 place
8. Dozer linkage pin ........................... 2 places
9. Dozer cylinder boss ......................... 1 place
10. Bucket link pin ................................ 2 places
grease the following
MAINTENANCE 39