Network-Dependent Functions; Integrate Device In An Ethernet Network - Seca 514 Administrator's Manual

Network-dependent functions

Integrate device in an Ethernet
seca 115
NOTE:
►
It is possible to combine network cards. For example, you can link
a
work and link the device itself to a PC on which the
software is installed via Ethernet.
►
Details on setting up the individual services can be found on the
pages which follow.
The following table shows the functions of the device and of the
software which require a network connection and states in what kind of net-
work these functions are available (• = available,
Height transmitted to the device wire-
lessly
Start the print function of the
PC software directly on the
seca 115
a
device
Send individual seca patient file from
the
seca 115
device
Search seca patient files from the
device in the patient database of the
PC software
seca 115
Save seca patient files from the
device in the patient database of the
seca 115
a.Available for seca 515/514 from SW version 1.1 and for seca 115 from
SW version 1.4
NOTE:
Information about using the network-dependent functions can be
found in the "Instructions for Use for Physicians and Assistants" for
this device and for the
1. Create the hardware link between the device and the network using an
Ethernet cable.
network
2. Call up the administrator menu on the device.
3. In the drop-down menu, select the
stadiometer to the device via
seca 360°
PC software to the
seca 115
wireless net-
seca 360°
seca 115
= not available):
-
seca 360°
wireless Ethernet
network
•
-
-
•
•
PC software.
element.
Ethernet network
Configuring the device • 37
English
PC
PC
seca 115
-
•
•
•
•