Creating Default Module Selection - Seca 514 Administrator's Manual

Creating default module selection

To create an in-house default module selection, proceed as outlined below.
1. Press the
menu changeover
The secondary menu is displayed.
2. Press the button.
settings
The menu appears.
User
3. Press the drop-down menu.
The drop-down menu opens.
4. Press the
Default module selection
The current module selection is displayed.
The
Raw data for impedance
tory. Activation/deactivation of the
evaluation modules affects the course of the bioimpedance
Health risk
measurement as outlined in the table below.
Evaluation module
-
Energy
Health risk
Raw data for
impedance
a.Interrogation of PAL and WC in the Module-specific entries dialog win-
dow. Dialog window is skipped if the Energy and Health risk evaluation
modules are deactivated.
5. Press all modules you wish to deactivate.
The tick in the checkbox is no longer displayed.
NOTE:
Press on a module again to reactivate it.
button.
menu element.
evaluation module is deactivated at the fac-
Raw data for impedance
Setting
• = activated,
= deactivated
Physical activity level (PAL) is
•
interrogated
No interrogation of physical
-
activity level (PAL)
Waist circumference (WC) is
•
interrogated
No interrogation of waist
-
circumference (WC)
Duration of measurement:
-
max. 17 s
Duration of measurement:
max. 75 s
•
Raw data for impedance available
for 19 frequencies
Configuring the device • 29
English
, and
Energy
a
Effect