Seca 514 Administrator's Manual page 46

46 •
The calibration display appears.
4. Press and hold the cross symbol.
The cross symbol changes position.
5. Press and hold the cross symbol.
The cross symbol changes position again
6. Repeat steps 4. and 5. until the cross symbol is no longer displayed.
The touchscreen display is calibrated.
7. Press the empty touchscreen display.
The dialog window is shown again.
system
Restoring factory settings
You can restore the factory settings for the functions below.
Function
Setup location
Language
Date format
Time format
Volume
Pre-tare (Pt)
Height
Brightness of display (back)lighting
Wireless module
Administrator PIN
CLS server and seca mediator service:
• IP address
• port
DHCP
Module selection for BIA measurement:
• display prior to BIA measurement
• active modules
1. Call up the Administrator menu.
2. In the drop-down menu, select the
3. In the dialog window, press the
system
line.
Factory setting
mm.dd.yyyy
raw data for impedance
deactivated
element.
system
button in the
Reset admin settings
Others
English
24 h
50 %
0 kg
0.0 cm
100 %
Off
00000
0.0.0.0
60767
yes
yes