Configuring Ipv6 Prefix Acquisition; Configuring Ipv6 Address And Prefix Acquisition; Configuring Stateless Dhcpv6 - HPE FlexNetwork MSR Series Comware 7 Layer 3 - Ip Services Configuration Manuals

Step
3. Configure the interface to
use DHCPv6 to obtain an
IPv6 address and other
configuration parameters.

Configuring IPv6 prefix acquisition

Step
1. Enter system view.
2. Enter interface view.
3. Configure the interface to
use DHCPv6 to obtain an
IPv6 prefix and other
configuration parameters.

Configuring IPv6 address and prefix acquisition

Step
1. Enter system view.
2. Enter interface view.
3. Configure the interface to
use DHCPv6 to obtain an
IPv6 address, an IPv6 prefix,
and other configuration
parameters.

Configuring stateless DHCPv6

Step
1. Enter system view.
2. Enter interface view.
Command
ipv6 address dhcp-alloc
[ option-group group-number |
rapid-commit ] *
Command
system-view
interface interface-type
interface-number
ipv6 dhcp client pd
prefix-number [ option-group
group-number | rapid-commit ] *
Command
system-view
interface interface-type
interface-number
ipv6 dhcp client stateful prefix
prefix-number [ option-group
option-group-number |
rapid-commit ] *
Command
system-view
interface interface-type
interface-number
289
Remarks
By default, the interface does not
use DHCPv6 for IPv6 address
acquisition.
Remarks
N/A
Supported interfaces include
Layer 3 Ethernet interface, Layer
3 Ethernet subinterface, Layer 3
aggregate interface, Layer 3
aggregate subinterface, and
VLAN interface.
By default, the interface does not
use DHCPv6 for IPv6 prefix
acquisition.
Remarks
N/A
Supported interfaces include
Layer 3 Ethernet interface, Layer
3 Ethernet subinterface, Layer 3
aggregate interface, Layer 3
aggregate subinterface, and
VLAN interface.
By default, the interface does not
use DHCPv6 for IPv6 address
and prefix acquisition.
Remarks
N/A
Supported interfaces include
Layer 3 Ethernet interface, Layer
3 Ethernet subinterface, Layer 3
aggregate interface, Layer 3
aggregate subinterface, and
VLAN interface.