HPE FlexNetwork MSR Series Comware 7 Layer 3 - Ip Services Configuration Manuals page 475
Hide thumbs
Also See for FlexNetwork MSR Series:
- Configuration manual (861 pages) ,
- Comware 5 security configuration manual (547 pages) ,
- Comware 5 layer 2 - wan access configuration manual (420 pages)
Table of Contents
Advertisement
[Router] display aft session ipv4 verbose
Initiator:
Source
IP/port: 30.1.1.1/11025
Destination IP/port: 20.1.1.1/21
DS-Lite tunnel peer: -
VPN instance/VLAN ID/Inline ID: -/-/-
Protocol: TCP(6)
Inbound interface: GigabitEthernet2/0/1
Responder:
Source
IP/port: 20.1.1.1/21
Destination IP/port: 30.1.1.1/11025
DS-Lite tunnel peer: -
VPN instance/VLAN ID/Inline ID: -/-/-
Protocol: TCP(6)
Inbound interface: GigabitEthernet2/0/2
State: TCP_ESTABLISHED
Application: FTP
Start time: 2014-03-13 09:07:30
Initiator->Responder:
Responder->Initiator:
Total sessions found: 1
TTL: 3577s
3 packets
124 bytes
2 packets
108 bytes
461
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the FlexNetwork MSR Series and is the answer not in the manual?