HPE FlexNetwork MSR Series Comware 7 Layer 3 - Ip Services Configuration Manuals page 201

NAT mapping behavior:
Mapping mode : Address and Port-Dependent
ACL : ---
Config status: Active
NAT ALG:
DNS : Enabled
FTP : Enabled
H323 : Disabled
ICMP-ERROR : Enabled
ILS : Disabled
MGCP : Disabled
NBT : Disabled
PPTP : Enabled
RTSP : Enabled
RSH : Disabled
SCCP : Disabled
SIP : Disabled
SQLNET : Disabled
TFTP : Disabled
XDMCP : Disabled
Static NAT load balancing:
NAT port block group information:
Totally 1 NAT port block groups.
Port block group 1:
Port range: 10001-15000
Block size: 500
Local IP address information:
Start address
10.110.10.1
Global IP pool information:
Start address
202.38.1.100
NAT outbound port block group information:
Totally 1 outbound port block group items.
Interface: GigabitEthernet2/0/2
Port block group: 1
Config status
# Display static NAT444 mappings.
[Router] display nat port-block static
Static port-block mapping tables:
Local VPN Local IP
--- 10.110.10.1
Disabled
End address
10.110.10.10
End address
202.38.1.100
: Active
Global IP
202.38.1.100
187
VPN instance
---
Port block Connections
10001-10500 2