HPE FlexNetwork MSR Series Comware 7 Layer 3 - Ip Services Configuration Manuals page 178

Address group 1:
Port range: 1-65535
Address information:
Start address
202.38.1.2
Address group 2:
Port range: 1-65535
Address information:
Start address
202.38.1.3
NAT inbound information:
Totally 1 NAT inbound rules.
Interface: GigabitEthernet2/0/2
ACL: 2000
NO-PAT: Y
Config status: Active
NAT outbound information:
Totally 1 NAT outbound rules.
Interface: GigabitEthernet2/0/2
ACL: 2000
NO-PAT: N
Config status: Active
NAT logging:
Log enable
Flow-begin
Flow-end
Flow-active
Port-block-assign
Port-block-withdraw : Disabled
Alarm
NAT mapping behavior:
Mapping mode : Address and Port-Dependent
ACL : ---
Config status: Active
NAT ALG:
DNS : Enabled
FTP : Enabled
H323 : Disabled
ICMP-ERROR : Enabled
ILS : Disabled
MGCP : Disabled
NBT : Disabled
End address
202.38.1.2
End address
202.38.1.3
Address group: 1
Reversible: Y
Address group: 2
Reversible: N
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
164
Add route: N
Port-preserved: N