Specifying An Advpn Domain For A Vam Client; Configuring A Pre-Shared Key For A Vam Client; Setting The Retry Interval And Retry Number For A Vam Client - HPE FlexNetwork MSR Series Comware 7 Layer 3 - Ip Services Configuration Manuals

Step
4. (Optional.) Specify the
secondary VAM server.

Specifying an ADVPN domain for a VAM client

Step
1. Enter system view.
2. Enter VAM client view.
3. Specify an ADVPN domain
for the VAM client.

Configuring a pre-shared key for a VAM client

The pre-shared key is used to generate initial encryption and authentication keys during connection
initialization. It is also used to generate encryption and authentication keys for subsequent packets if
encryption and authentication are needed.
All VAM clients and the VAM server in an ADVPN domain must have the same pre-shared key. If they
have different pre-shared keys, the decryption and authentication will fail, and they cannot establish
any connection.
To configure a pre-shared key for a VAM client:
Step
1. Enter system view.
2. Enter VAM client view.
3. Configure a pre-shared key
for the VAM client.

Setting the retry interval and retry number for a VAM client

After a VAM client sends a request to the server, it resends the request if it does not receive any
responses within the retry interval. If the client fails to receive a response after maximum attempts
(retry times + 1), the client determines that the server is unreachable.
The retry-times setting does not apply to register and update requests. The client sends those
requests at the retry interval until it goes offline.
To set the retry interval and retry number for a VAM client:
Step
1. Enter system view.
2. Enter VAM client view.
3. Set the retry interval and
retry number.
Command
server secondary { ip-address
ip-address | ipv6-address
ipv6-address | name host-name }
[ port port-number ]
Command
system-view
vam client name client-name
advpn-domain domain-name
Command
system-view
vam client name client-name
pre-shared-key { cipher | simple }
string
Command
system-view
vam client name client-name
retry interval interval count
retries
369
Remarks
By default, no VAM server is
specified.
Remarks
N/A
N/A
By default, no ADVPN domain is
specified for a VAM client.
Remarks
N/A
N/A
By default, no pre-shared key
is configured for a VAM client.
Remarks
N/A
N/A
By default, the retry interval is 5
seconds, and the retry number
are 3.