Enabling Ip Conflict Notification - HPE FlexNetwork MSR Series Comware 7 Layer 3 - Ip Services Configuration Manuals

Enabling IP conflict notification

By default, if the sender IP address of an ARP packet is being used by the receiving device, the
receiving device sends a gratuitous ARP request. It also displays an error message after it receives
an ARP reply about the conflict.
You can use this command to enable the device to display error messages before sending a
gratuitous ARP reply or request for conflict confirmation.
To enable IP conflict notification:
Step
1. Enter system view.
2. Enable IP conflict
notification.
Command
system-view
arp ip-conflict log prompt
12
Remarks
N/A
By default, IP conflict notification is
disabled.