Configuration Procedure; Verifying The Configuration - HPE FlexNetwork MSR Series Comware 7 Layer 3 - Ip Services Configuration Manuals

Configuration procedure

# Specify IPv6 addresses for GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2.
<RouterA> system-view
[RouterA] interface gigabitethernet 1/0/2
[RouterA-GigabitEthernet1/0/2] ipv6 address 2::1 64
[RouterA-GigabitEthernet1/0/2] quit
[RouterA] interface gigabitethernet 1/0/1
[RouterA-GigabitEthernet1/0/1] ipv6 address 1::1 64
# Disable RA message suppression on GigabitEthernet 1/0/1.
[RouterA-GigabitEthernet1/0/1] undo ipv6 nd ra halt
# Set the M flag to 1 in RA advertisements to be sent on GigabitEthernet 1/0/1. Hosts that receive the
RA messages will obtain IPv6 addresses through DHCPv6.
[RouterA-GigabitEthernet1/0/1] ipv6 nd autoconfig managed-address-flag
# Set the O flag to 1 in RA advertisements to be sent on GigabitEthernet 1/0/1. Hosts that receive the
RA messages will obtain information other than IPv6 address through DHCPv6.
[RouterA-GigabitEthernet1/0/1] ipv6 nd autoconfig other-flag
# Enable the DHCPv6 relay agent on GigabitEthernet 1/0/1 and specify the DHCPv6 server on the
relay agent.
[RouterA-GigabitEthernet1/0/1] ipv6 dhcp select relay
[RouterA-GigabitEthernet1/0/1] ipv6 dhcp relay server-address 2::2

Verifying the configuration

# Display DHCPv6 server address information on Router A.
[RouterA-GigabitEthernet1/0/1] display ipv6 dhcp relay server-address
Interface: GigabitEthernet1/0/1
Server address
2::2
# Display packet statistics on the DHCPv6 relay agent.
[RouterA-GigabitEthernet1/0/1] display ipv6 dhcp relay statistics
Packets dropped
Packets received
Solicit
Request
Confirm
Renew
Rebind
Release
Decline
Information-request
Relay-forward
Relay-reply
Packets sent
Advertise
Reconfigure
Reply
Outgoing Interface
: 0
: 14
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 7
: 0
: 7
: 14
: 0
: 0
: 7
286